This pictures demo the fairing with lock on the old version 120mm

There is a hole in the fairing.

Originally Posted by Pepperpete

Can you show us a runup on this fan Jack?

Hi ,

Thanks for Skymaster Mr Anton flew our 120mm EDF on his F-15 yesterday.

I have updated it on YouTube:

Skymater F 15EDF Taiwan Tornado fan (5 min 27 sec)

Original Video comes from Youku:

http://v.youku.com/v_show/id_XNDg4MzA3NzU2.html Powered by Mr AntonLin

I don't understand why the post above is blocked? It is a good post regarding the topic!
Thanks for posting the video of your fan flying Jack. I think the sound on takeoff says it all!
Fantastic

test the Taiwan Tornado 120mm EDF with Skymaster F-15EDF

http://v.youku.com/v_show/id_XNDg4MzA3NzU2.html

Originally Posted by 4stripes

I don't understand why the post above is blocked? It is a good post regarding the topic!
Thanks for posting the video of your fan flying Jack. I think the sound on takeoff says it all!
Fantastic

Thanks for the identification.

BTW , New design and Golden High End version:

Originally Posted by RCPLIOTTW

test the Taiwan Tornado 120mm EDF with Skymaster F-15EDF

http://v.youku.com/v_show/id_XNDg4MzA3NzU2.html

Thanks for Anton testing our 120mm EDF engine.

I am not partial to the "golden" colour. A scale grey tint to replicate what most turbofans look like might look even better.
Cheers

Originally Posted by 4stripes

I am not partial to the "golden" colour. A scale grey tint to replicate what most turbofans look like might look even better.
Cheers

Thanks ,No matter what color will be ,the quality and engine high performance are our mission .

Jack
In the gold pic,how is the hub held on..is it screwed onto the blades..in the previous pic there is a hole in the hub but in the gold pic there is not..how is it held in place.?

Originally Posted by Hover or die

Jack
In the gold pic,how is the hub held on..is it screwed onto the blades..in the previous pic there is a hole in the hub but in the gold pic there is not..how is it held in place.?

Cool, your look our fan very carefully!!!

Yes, The hub bottom has the screw thread. Small change , it is very good for the dynamic balance.

Pls check the blade in my hand:

where can i get one?

Originally Posted by bri6672

Absolutely! 12s 135amps 19lbs of thrust 225mph with 3 3/8 diameter thrust tube.

The DS-94 hst does 22lbs at 155 amps on 12s.

That is nice pushing power from DS

DS-94 RPM range: 21.000-22.500rpm

Taiwan Tornado RPM range :65.000-100.000rpm

you know the different quality between metal blade and carbon fiber blade.

Originally Posted by viperviper

where can i get one?

Hi ViperViper:

you can reach me at jack@tw-tornado.com for getting one setup 120mm EDF engine.

Jack

Originally Posted by bri6672

Yeah this thing needs to go back to Taiwan for an overhaul, ridiculously inefficient.

It is okie, It is all up to you , you could choose the fan manufacturer in USA which close to you. but we do give our service to worldwide.

Why are all of these posts being hidden? Somebody reporting him for showing us something new?

Probably need to get rid of the undercambered tip airfoil. That can't be doing it any good.