|Jun 06, 2013, 06:04 PM|
HobbyKing Plug N Play Aircraft Engine Sound Module System
Was able to get in and order one of these from the first batch of HK sound modules, looks like they sold out pretty quickly. Hoping to have this thread as a collection of possible mods for this module so please contribute, the good, the bad and the ugly!
XT 60 Converter/Power Lead
ESC to Module Converter Lead
Working Voltage: 10v~17v
Dimensions: 74mm x 22mm x 34mm
Rated Power: 15w
Frequency Response: 200~8000hz
Rated Impedance: 8 ohm
Harmonic Distortion: 3%~5% TMD
Volume (max): 60db
|Jul 03, 2013, 04:22 PM|
These back in stock the day after I bought the machine gun sounds for a laugh. Have not got a clue how to connect it all up. Typical from China no explanations or instructions and half of what the write doesn't make sense
There was a thread I was gonna post in but it's been closed
|Jul 03, 2013, 04:52 PM|
Well I finally got a chance to test run this unit on a slow stick that used for testing powered off a 3s 1800mah... it sounds good on the ground but on RTO at 30-40 ft and and just a few ft off the ground the audio quickly faded out and was only audible on low overhead passes. Yeah the 60db max doesn't help but my theory to the lack of audio in the air is that the speaker is out in the open and not in a fuse to act as a "speaker box".
I opened the module up to see if there was a volume adjustment and there is none, also unless you're some sort of programmer and are able to hack in to the circuit board there is no way to mod the audio. Putting this on the back burner for now as I got a couple other projects to get to, I may come back to this and test on a balsa model (Ultra Stick 25e) and see if the fuse improves the audio.
Hopefully someone comes up with a mod to increase audio output, so please share with the rest.
|Jul 04, 2013, 09:59 PM|
I have one sitting in a order (something else is back-ordered) - but just saw the MrRcSound unit. Claims 95db but costs 4x the price.
As I won't be receiving mine for a while, really interested in any feedback of how loud this is if the speaker is 'exposed' in the fuselage on a flyby.
|Jul 19, 2013, 02:15 PM|
Fitted the machine gun module last wk on my PZ t28 as that seemed the easiest to test in, I fitted the speaker in the cowel, sounds pretty poor to be honest but what to expect with cheap stuff, couldn't really hear it on the overhead passes unless I cut the throttle then it was clearly audible, today I tries to make it a little louder and did this..
Just the lights to rig up see what they're like
|Jul 19, 2013, 06:21 PM|
That link should work, will try get a vid of it on the air nxt time I'm out. Maybe the speaker could be changed for a better one with a deeper tone
|Jul 19, 2013, 06:35 PM|
I did not even see the link; thanks!
Your link is to Dr. Mad Machine Gun module? Thats it, thank you!
The sound is pretty bad, but it can cost some serious bucks for one of the other sound modules.
I heard this guy's at SEFF (link below), he really had some great sound on his electric ships and I have been considering one for my giant Cub. My only hesitation is cost: http://www.modelsoundsinc.com
|Jul 20, 2013, 04:32 AM|
Yeah it sounds very "tinny" it needs more grunt to it, I did come across a link on utube that sounds awesome and on the same plane too, I'm not bothered about this plane I've put it in as I chuck this about and don't care if it crashes lol I deffo would not put it in any of my others.
This one sounds awesome
|Nov 12, 2013, 07:45 PM|
These type of units need a speaker box or cone encapsulating the speaker.
The output speaker for the motor sound unit should not be placed right behind or under the motor as it will definitely get washed out.
You want to place the speakers at least 6" away from the prop.
Most people put the speakers in the wing or on the belly.
Here is a hellcat with the machine gun unit fitted:
Motor sound unit....this video demonstrates it on only 3s. A 4s will make it louder plus the addition of a speaker box enclosure will help.
For larger planes, you might consider installing two of these in the same plane. Cost wise....its still 1/4 the price of some other units. Granted, the bendini and MrRCsound units are rally good, but for a larger plane....$219 is rather high but does do a better job and has amplifiers. That's one idea though is to put an amp inline between the speaker and the sound unit on this hobbyking module.
|Jan 10, 2014, 01:42 PM|
Here is video of my PZ Wildcat with HK DR Mad Thrust gun sound and light module.
I changed LED's to 3mm bright white, and placed speaker in the tail section, close behind cockpit. sound is coming out of the vent hole, and whole plane works as a speaker box (resonator)
It actually sounds good, and I can hear it from 100-150 ft, as long as there is no gassers flying.
Speaker placement is the key! It can not be flat against something, since speaker membrane can be hitting, and sound level will decrease.
I also put two of these in 60 size 47. It has one sound module and one speaker per wing. (Picture below). Since picture was taken I cut out rectangle holes, where ammo shells would fall out in full size plane.
Wooden wing is great resonator, and it sounds louder than Wildcat, and little deeper too.
i'll post video at some point.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Article||Hangar 9's Piper J-3 Cub 40 Plug-N-Play PNP Plug N Play Evo 46NT Powered ARF Review||tailskid2||Scale Fuel Planes||8||Dec 24, 2013 05:08 PM|
|Sold||Super Built Trex 250 combo Plug n play Like new Trades for airplane?||sammydabull||Aircraft - Electric - Helis (FS/W)||1||May 06, 2013 04:52 PM|
|For Sale||**Gorgeous Eflite Extra 300 32E in new condition LPU Plug n Play**||sammydabull||Aircraft - Electric - Airplanes (FS/W)||0||May 01, 2013 02:14 AM|
|For Sale||Super Built Trex 250 combo Plug n play Like new||sammydabull||Aircraft - Electric - Helis (FS/W)||0||Apr 26, 2013 02:32 AM|
|For Sale||Super Built Trex 250 combo Plug n play Like new||sammydabull||Aircraft - Electric - Helis (FS/W)||0||Apr 04, 2013 09:03 PM|