|Dec 30, 2010, 02:46 PM|
Oh No, ... Not Again! Ziroli Beech Expeditor D-18/C-45 PSS
Well Guy's, The stars are aligning up and the Dauntless is on track to finish her up well before the slope fest sooooo, ... I have been gathering up all the info I need for this build.
I will use the lessons learned from the Dauntless build and "THIS TIME" () I will build her light, ... no mold making on this one.
The goal is to have more or less, a GIANT floater. I will be making the fuselage and the engine nacelles using the lost foam method. Because of the size of this model, I am going to do this one a little different, ... think BBQ Rotisserie!
Anyhow, ... Rick (Sherpa) dropped off the foam for the fuselage and the nacelles (THANKS RICK ). The foam has already been hot wired to the basic blocks. I had the fuse blocks cut down the middle so I can lay in a piece of pipe down the center and that will act as the rotisserie rod. I will also be making a couple of stands with bearings for each end and a way to lock the fuselage in any position I need it to be in to aid in the shaping. Just like those engine stands that can rotate while you build your engine.
Scale 2.4" = 1'
Wing Span 114"
Wing Area 1950 sq. in.
* Weight Goal under 17 pounds
Here is a couple of pictures of the paint scheme I will be doing, along with a picture of the foam.
|Dec 30, 2010, 04:58 PM|
I have a shop who has full size blocks 4 X 4 X feet. The full size billet is approximately 150.00 USD. They cut my block for the B-25 and will do just about any size you need. Their web site is http://www.xydroid.com/
The sell the machines starting at 25,000.00 USD The router and lathe combo starts at 80,000.00 USD if you want the ultra machine. Let me know if you buy one as I can store it for you.
who doesn't have enough money for the wire let alone the machine
|Dec 30, 2010, 07:04 PM|
Thanks Guy's, ... I think this one is going to be a fun build. There is nothing in particular that this plane does that makes it stick out, ... but it's has some classy lines to it, ... well an least it does to me. And I wanted something other than silver, blue, camo so I think this is visible for a floater and on/in the ground. To me, ... Camo and a Cajon mix, ... seems like a lot of time is needlessly spent mountain climbing!
The only tricky part I think, is going to be getting the middle wing section looking right. I thought the Dauntless had a thick airfoil, ... this beast sports 5.5" thick at the fuse! Looks like were going to have to use a little "Fugeination" (an old word I just made up ) to get it to look right because I'm not going with an airfoil that thick unless I get to fly "ON" it.
Hmm, ... speaking of a wing ... (add whistling sound)
Dave, ... look, ... it's already been wired!
|Dec 31, 2010, 10:19 AM|
They had different versions including an extended glass house bomber version. Although this color pattern is not one of them.
I dont see much of an issue simply because their are more or less, 3 noses. The center wing section, engine nacelles and the fuselage will be one piece. Basically I will make a couple of steel, brass or lead discs to sit behind the mock up engines.
No, ... I dont anticipate any real issues with it.
|Jan 05, 2011, 04:51 PM|
Yesterday, I went and bought 2 sheets of .125" Masonite that is painted on one side so I could make some patterns. I started by making (2) of each, ... top and side views. I will use these patterns to hot wire the foam to it's basic shape.
Before I cut the profiles, ... I need to inlay an 1.125" aluminum tube to act as a spine. The spine will stay in the fuselage until after I wrap it in fiberglass. After fiber-glassing, ... I will pour in the Acetone, probably a half gallon will do it, ... then all the foam will turn to a messy slury and the tube will then be removed. Also I will be adding Nomex strips to the top, sides and bottom before glassing so I get a rigid fuse. This thing is big, ... just to get an ides, ... the cross section of the fuse at it's thickest part, between ribs 5 & 6 is 13.25" tall and 11.25" wide. I also need to thin the wing down, ... the plan shows 5.25" thick at the spar, ... like that's going to happen!
who still has plenty of time
The pictures show the pattern from a ladder view from the ground. Also the wing root thickness. The table is 4'x8'.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||Ziroli D-18 kits for sale||pilotdoug||Aircraft - Fuel - Airplanes (FS/W)||0||Dec 20, 2010 11:43 PM|
|Discussion||OH NO! NOT LED's AGAIN||ZZ Prop||Foamies (Scratchbuilt)||5||Mar 30, 2009 09:44 PM|
|Question||Oh NO not again! Eclipse 7 use for dlg||balsaaddict||Hand Launch||10||Aug 05, 2008 08:51 PM|
|Discussion||Oh no! Not the Bug again.....||Joe Yap||Hand Launch||66||Jan 04, 2007 01:47 PM|
|Bandit (oh no ! not again !)||Lele||Electric Sailplanes||115||Mar 08, 2003 06:16 PM|