He still have problems, but tomorrow will be the day he will have at least the right PCB´s for us, really, at least there will be pictures tomorrow.

Originally Posted by Goofy23

He still have problems, but tomorrow will be the day he will have at least the right PCB´s for us, really, at least there will be pictures tomorrow.

Paul,

He might be a nice guy but he is having too many problems, that to me is a sign that you should look elsewhere in the future.
Good Business is about coming up with the goods when you say you will, at the price you agree, with no stress on either side. Problems can happen but they are dealt with quickly and efficiently so that they are only a slight hickup.
Both side should walk away at the end with the feeling of a job well done and a bit of cash jingling in their pockets and happy to do repeat business.
The alternative will send you to an early grave because of the stress and also very little money.
Good Business is easy business

err sorry about the lecture

Sorry Ray, but the problem was only with the printing, so i forgive him.
The most important is he deliver the quality we want.
Its his first run on the board, and all problems will be sorted out after the beta so afterwards everything is ready for the production.
Yes i also didnt liked the little festive period but more important is he is honest.
Normally i really like to deal with my manufactorer, ok he is sometimes a bit inconsistent with the delivery times but did always a good job.
I know other manufactorers but such a guy is hard to find (can talk hours about it why).

Paul,

You are right! if he delivers the quality then he can be forgiven a lot just for that. Anyway its not my business and i should keep my nose out of it! sorry

oh really no problem Ray, i can understand you i also dont want to wait anymore.
It´s also no nice feeling for me, i feel a bit like a child who know what he gets on cristmas and have to wait a month for it ( i am also needing more flyduinos here for my copter projects, ASP).
But now its the night before cristmas evening (or your cristmas morning, spend a cristmas in UK when i was a child on which i got some modell rokets)
Just wanted to point out to get a complete populated pcb is a bit more complicated then to buy a liter of milk in your next supermarket, especially on the first run.
I hope i can sleep well tonight
tomorrow i will see at least some pics of the boards and if its cristmas and birthday together he may have some populated in the evening.
Lets us hope, i reply as far i have news.

kein problem,

bei ATMEL muss man 28 Wochen warten auf einen AVR.

He send me some pictures
This is the best he made.
He his into it, he need some more steps till the pcb is ready.
Pic of the bottom side.

Originally Posted by Goofy23

He send me some pictures
This is the best he made.
He his into it, he need some more steps till the pcb is ready.
Pic of the bottom side.

Those babes are looking good!
It also looks like you're half way through to your break even...

Originally Posted by Goofy23

He send me some pictures
This is the best he made.
He his into it, he need some more steps till the pcb is ready.
Pic of the bottom side.

If you look really really close, you will see my name on that board.

Frederic

let me have a look......yes it seems

Paul,

Any news yet? mainly when are they due to be shipped but any news would be good.

Autolevel testing with Flyduino and FreeFlight IMU on my Quad.

This time carrying an unbalanced load in the form of a 172 grams 3S 2200 on the rear left arm....

More tuning needed. Still on stock PID´s in Pre1.7

MWC level test part2 (1 min 6 sec)

Wow Jussi, incredible performance!

@whiteturbo
no news till now, but its weekend there, ok he have the habit to answer my mails on sunday night, but i hope for an update tomorrow.
I am sure he is working on it.
Shipping will be be fast to me, when they are ready, shipping to uk from me shouldnt be that long.

OK paul, Thank you, Lets hope he is quick because i neeeed a Flyduino fix, and very soon, or i will explode

oh me too ray, me too.
At the moment i try to do other things like milling frames and so on to get my mind free.
And BTW in a no great news watcher but this days i follow the news sadly every hour