Complete Multiplex Twinstar, FPV/AP Plane Completely Ready To Go . Shipped or LPU
Complete Multiplex Twinstar, FPV/AP Plane Completely Ready To Go . Shipped to CONUS or LPU.
I built this a few months ago and have maybe four flights on it, never crashed or even belly landed. In near perfect condition with some really cool modifications. Very clean build with reinforced surface control hardware and great attention to detail.
It has oversized front landing gear that supports the addition of a GoPro camera for AP. Also added was a steerable tail wheel that works really well. The additions were cleanly installed and allow for AP with no obstruction. The placement of the GoPro promotes the CG well and produces as little drag as possible. My intent was to add a brushless gimbal for smoother video but I just never got around to it.
Getting at least 12 to 15 minutes flight time on the supplied 5000mah lipo. Had voltage to spare after each flight but never really pushed it too far to ascertain exact flight maximum time.
Has installed 5.8 FPV gear including an NTSC 520 line camera and Immersion 600mw 5.8ghz VTX. Sorry, the plane is available for sale without the FPV gear but will not sell the camera and/or VTX by themselves. The top deck has the camera installed but I left a large open space to be customized to preference by the buyer. Great all around plane that flies nicely. Plenty of power to loop and roll in FPV. GoPro in pics not included.
$250, or $425 with the FPV gear. LPU would be best of course but willing to ship via USPS for an additional $60, (Will supply tracking but insurance would be extra, please allow ample time to properly box). Parts list below:
Airframe: Multiplex Twinstar II
Motors: Turnigy Park 450, 890kv
Props: APC 6X4e
ESC's: Turnigy Plush 40amp
Servos: Hitec HS82 MG
Flight Rx: Spektrum AR7000 6ch Rx
Stabilizer: Orange RX3S 3 Axis Flight Stabilizer, (still needs fine tuning)
Flight Lipo: qty 1 Turnigy Nano-Tech, 5000mah, 3s, 45c, (not perfect condition at all but still has life, price adjusted accordingly)
FPV Lipo: qty 4 Turnigy Nano-Tech, 370mah 3s
FPV Camera: RMRC 520 line, NTSC
FPV VTX: Immersion 600mw 5.8
Last edited by nautique; Sep 13, 2013 at 11:04 AM.
Thank you, actually works really well. As mentioned I had planned to add a brushless gimbal if kept it. I think it would work awesome. Plenty of power and wing surface to carry it.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||FPV system ready to go! GoPro cable included. For sale or trade.||Bmx2996||Aircraft - General - Miscellaneous (FS/W)||1||Jun 14, 2013 09:55 AM|
|For Sale||RTF Multiplex Twinstar w/PowerPack, FPV system and more - Video...||wac||FPV Equipment (FS/W)||3||Mar 24, 2013 05:56 PM|
|For Sale||Complete FPV Twinstar II & GS Setup, ready to fly.||Jonno271||FPV Equipment (FS/W)||10||Mar 06, 2012 04:27 PM|
|Sold||LPU Northwest Mo or San Antonio, Tx. Skywalker fpv plane fully set up and ready to go||randall1959||FPV Equipment (FS/W)||2||Jan 14, 2012 08:29 AM|
|Gallery||Multiplex TwinStar 2 ready for test flight||Patrick Plawner||Your Plane Photos||0||Aug 05, 2005 07:21 AM|