|Apr 29, 2013, 03:21 AM|
What modifications did they make that you know of (apart from the 3 piece wing).
|Apr 29, 2013, 08:06 AM|
Joined Nov 2010
Here’s all the propaganda I had. We had a few “On Order”, for well after forever and they never showed. They flew it at Faszination Modellbau Karrlsruhe 2012 and one of my guys, in Germany, “stumbled” into them test flying it at some event?
Here’s a untested link for info as to the current status of tangent. email@example.com
The VORTEX MACH I is not a refinement, but a completely new design.
Optimally designed for large glider competitions.
Suitable for aero-tow and winch start as well as hand start on slopes.
Experience from 10 years of competition has been incorporated into the model.
For dynamic flying, the airfoil load can be increased by the click-ballast system.
The good braking performance of ailerons and cambered flaps in the butterfly position facilitates pinpoint landings.
• Weight-optimized GRP/CFRP fuselage with finely differentiated carbon reinforcement
• Pendulum-type rudder locking system is ready for assembly
• Easy-to-transport, 4-part wing in the latest CHAMP design
• The eliptical lift distribution of the wing is uncompromisingly designed for performance and competitive capabilities
• Force is transmitted via a generously dimensioned rectangular composite hybrid wing strut
• Dimension and torsional characteristics of the rudder flaps are designed for competitive use
• Rudder pre-hinged as elastic flap
• Minimized aileron gap
• Cambered flaps equipped with perfect sealing lip
• Elevators equipped with proven pendulum-type rudder system and integrated tailplane strut
• Laser-cut RC-wood set and high quality small parts
• GRP cockpit canopy for 2.4 GHz operations
• Two-color covering white/blue
• 4-flap model
• Competition design
• Short construction time
• Glider and electric version available
Wingspan approx. 4400 mm
Overall length, approx. 1930 mm
All-up weight, approx. 5300 g
Wing area 91 dm˛
Wing section TA_30_85
Wing loading 57 g/dm˛
|Apr 29, 2013, 04:22 PM|
JAY.....points taken. As I've said, the left wings' covering came off easy, I only barely started taking off the right wings' covering, noting that it was stuck down too well and will need some heat to loosen it up to be able to remove it in bigger pieces as oppose to little bits and pieces, but hadn't yet noticed the colored part of the covering remaining. It just only wanted to come off in little pieces. I understand about the weight non-issue as well, as I've explained to others who were concerned about that when contemplating electrifying it or not.
Whether to recover or to watch some videos and attempt to glass, fill, and paint, will be decided later.
|Aug 28, 2013, 05:04 PM|
The View ! A very good reason to LOVE slope soaring . No noisy engines , just the fantastic breeze and fresh air , one can sit here all day !! Well and fly of course !
|Oct 04, 2013, 02:57 PM|
Luckily the weather was great at Rhossili, so i got a chance to fly the alpina. I was undecided as it was very windy, about 25 mph+, but dragged it too the top of the 600ft slope.
I dont usually fly the alpina in this much wind, but it flew fine, if the wings did flex somewhat when i loaded up the g-force
Unfortunately, the battery had ran out on my nex camera, so i used the go pro, so there wasnt much footage to get a good edit, but it gives you an idea. After the video of the Alpina, the wind really picked up, so i flew the Pace VX, a 2.5m heavy mouldie (see pace thread), which is most definately a high wind model, and it was eating up the sky. Great to see the Alpina can fly almost in Pace conditions!
|Jan 09, 2014, 02:33 PM|
Two recent additions to my hanger finally got a maiden. They were my 3.4m Kult and my replacement Multiplex Acrostar.
The wind was 25-30 mph straight on, quite gusty at time. The Kult felt really solid, more so that the alpina would of done in those conditions. It's aerobatic performance was excellent and also excellent inverted with a trusty MH32 section. Zero wing flex, solid and straight. The acrostar was much like my old one that had a hard life, rejuvenated. They are a really good complement to the more impressive Alpina but fly as well as you would expect from something from the Multiplex/tangent stable.
image by slopeflyer12, on Flickr
|Jul 19, 2014, 03:12 PM|
Ugh. This thread again! I miss my Alpina. Gonna have to order Paul's new video from RadioCarbonArt and learn how to repair mine (which is still up in the rafters of my garage waiting to be fixed.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Multiplex ALPINA CARBON MASTER EDITION||Rain Maker||Aircraft - Sailplanes (FS/W)||54||Nov 14, 2013 11:29 PM|
|Discussion||Alpina 4001 electro master edition||hendrix||Electric Sailplanes||46||May 08, 2009 02:59 PM|
|Sold||Alpina 4001 Carbon Master Edition kit NIB||XB-70||Aircraft - Sailplanes (FS/W)||0||Apr 06, 2009 05:48 PM|
|Sold||Multiplex/Tangent Alpina Pro 4001 Carbon Master Edition||sekollera||Aircraft - Sailplanes (FS/W)||6||Aug 30, 2007 08:51 AM|
|For Sale||Multiplex Alpina 4001 Carbon Master Edition NIB||Mark Miller||Aircraft - Sailplanes (FS/W)||4||Aug 09, 2006 10:31 AM|