|May 07, 2014, 06:49 PM|
United States, FL, Orlando
Joined Aug 2007
Dumas CC Cobra Planking
Well after looking at this kit sitting on my shelf for 2 years I have decided to finally build it After reading all the other reviews it seems that most have said it builds heavy, so my question is this, should I sub-plank with the supplied wood or use a balsa, or other lighter sub-plank? I am planing on glassing the hull so I would think the lighter material should work. thanks for your advice
|May 07, 2014, 07:32 PM|
If you can get thinner mahogany strips, that's a start, the one inch ply is fairly light, but I think most of the weight comes from the resin, many coats adds up, if you can keep the layers to a minimum, all the better. It's a small boat, the lighter the materials the less it weighs. And of course, the electronics should be light as possible too. Onward, pictures and enjoy building.
|May 10, 2014, 09:48 AM|
I have built more than a few of the Dumas and other kits. The extra weight of double planking will help you. Build too light, it will bob like a cork and you will have to add ballast in the right places for it to run and plane correctly. I built this Dumas Runabout back in the mid 90's. This is how it looks today. Seal it correctly it will last a long time. It weight out to a little over 10 lbs.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Nitro Dumas CC Cobra||55Cobra||Scale Boats||9||Dec 28, 2012 08:53 PM|
|Sold||Dumas CC Cobra||Captain Bill||Boats (FS/W)||3||Sep 23, 2008 06:53 PM|
|Question||dumas cobra planking probem, help??????||miky2001||Scale Boats||3||Jan 17, 2005 09:36 PM|
|planking the dumas cobra||miky2001||Scale Boats||1||Jan 14, 2005 08:36 PM|
|Dumas CC-Cobra||JB608||Scale Boats||3||Oct 01, 2004 10:27 AM|