Dear all

I will present my new Waterplane Model.

Beriev Be200.
This Scratchbuilt Model is a complete 3/6 mm Depron construction.

hull: 1,50 m
wing : 1,51 m
weight: 1600 gramm
2 X EDF 64 BL Fans with 2 X 220 W ( ADH300L, next time ADH300 XL )

The first Flight was on 11.09.2011.
This Model is available next weeks by: www.scale-parkflyer.deby Plan or Kit.

Link to RCline: http://www.rclineforum.de/forum/boar...00-mit-2-x-ed/

Movie:
http://www.rcmovie.de/video/9b469a9cbfd26c549f23

Here you see some pictures:

see here:

next one :-)

next one...

The time to built the Model was raound about 3 Weeks and a few days for finish.

Link to Movie:

http://www.rcmovie.de/video/9b469a9cbfd26c549f23

I hope to read next time a lot of discussions to this Thread.
I have seen some Theads to this wunderfull plane here.

The Hull on lower side it is in this moment a update for a better Lift of. ( see white area on the Hull )
The first version of the Hull line, it was difficult to start.

What a beautiful job of building! Off to watch the movie ...
Congratulations!
PeteM

Dear Pete

The Sound is pefect too

greetings from germany
Frank

Nice job on the Beriev!! and nice to see another Be-200 model in the air

I finished up and flew a little smaller (about 1 meter span) balsa one last year:

http://www.rcgroups.com/forums/showt...ghlight=beriev

Hi Thomas

Nice Be200, you have built.
Can start your Be200 from the Water ? Pictures and Movie shows only a fly by a Airfield and pics from the Water.

Frank

I love the way this full sized one sits nose high while picking up water.

Majestic aircraft.

Seaplanes pick up water (2 min 16 sec)

I'm always amazed at what people like you can come with using Depron. Very nice job.

Originally Posted by Scale-Parkflyer

Hi Thomas

Nice Be200, you have built.
Can start your Be200 from the Water ? Pictures and Movie shows only a fly by a Airfield and pics from the Water.

Frank

No water video yet. Will not quite ROW from a standstill, but will ROW with a put to get it in the step, or a short grass slide at the beginning to get it moving. Does lovely touch and goes on the water. Plan on refining the hull with some chines and a spray rail and think that will allow unassisted ROW of this model, with it's 10-12 oz of total thrust.

Have been working on modifying the small plans for a larger one, either 2 meters for twin 70mm fans, or 2.7 meters for twin 90mm fans.

Excellent job on the be200!! I enjoyed this!

Hi together

here new pictures from Friday.
Now, i must modify the Hull for a better optik.