|Mar 26, 2012, 05:55 PM|
Sorry for all the? But need help with slow motor/ESC
I'm done building my quadcopter.Updated to KKQuadControllerV4_7_X before I did any intial setup of the ESC and now I can't find any info to how I set the ESC's. 3 of my motors are in sync, but one only turn on when I get past 50-60% on the throttle stick. Do I need to change setup for that ESC or is the motor or ESC broken?
The other motors starts to spinn if I only give it small amount of throttle but not the rear right motor.
|Mar 26, 2012, 06:13 PM|
Joined Jul 2008
Most likely you will need to reflash the firmware of your KK controller to fix the problem. I believe there was a bug in some versions that could cause the 4th motor to lag behind on throttle inputs.
I had the same problem and fixed it by reflashing my board.
Look at this post;
for the version of the firmware that works for me.
Edit - there's a whole thread on the problem here;
|Mar 26, 2012, 07:06 PM|
As I read the threads I noticed someone write that the yaw pot was reverced.
Turned it the other way and followed the setup esc guide and now it works perfectly!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion need help with finding a new motor for AJ slick||epoweredrc||Atlanta Area RC||10||Mar 23, 2012 07:34 PM|
|Discussion Still learning but a video from the other day - slow-mo help with 60i?||slowjett||Aerial Photography||5||Mar 20, 2012 09:51 AM|
|Discussion Sorry but I need help||walshy155||Electric Ducted Fan Jet Talk||55||Oct 25, 2011 11:00 PM|
|Help! all the parts needed for a new GWS slow stick NP kit ?||cyclops2||Foamies (Kits)||1||Sep 08, 2011 02:33 PM|
|Need help with motor choice for GIANT Slow Stick||Turbo442||Power Systems||0||Apr 30, 2004 01:58 PM|