Lol

Originally Posted by Woody_99

I could say that I was refering the the Progressive RC cable when I said I didn't know when it would be back in stock, but ... I wasn't.
I didn't even notice it was out of stock.

So, I'm busted!

You could have argued at least it has an ETA

So what's wrong with THESE?

I ordered two of 'em on Wednesday and got them today. They look like they're top quality and the balance lead plugs right into my Hitec X4.

Pete

Nothing wrong with those either, and the Progressive connectors are back in stock too!

Originally Posted by yurstruly

yes it will meet your needs at the current level. my question is are you planning to expand to a larger plane in the future which will demand a larger packs of cells and amps? if you say yes, you might have to reconsider buying a larger capacities charger that has a typical output of 20A or more but then those are in the $150 and more for a good




charger

My Turnigy Accucel-6 50W 6A Balancer/Charger turned up in post today ! so can you tell me all the settings i will have to program into the Accucel-6.

I will be charging 6X UMX MiniAviation 300 mAh 30c 2S1P packs useing the 6 port charger board at 2c

Please guys can you tell me what the (c) in 2c means please (LOL Im such a newby) when it comes to parallel charging and 2 cell charging.

So if you could tell me the settings for my Accucel-6 and tell me what C means .

All your help and guidance would be very appreciated from you guys on RCgroups

Read through some of this thread. It's all about parallel charging and will help you to understand the settings you should use.
http://www.rcgroups.com/forums/showt...parallel+charg

Hi... please read the post above me about proper parallel charging
next is check this thread about your Accucel charger:
http://www.rcgroups.com/forums/showthread.php?t=886698

and don't forget to read your manual first.. enjoy!

Originally Posted by richos

My Turnigy Accucel-6 50W 6A Balancer/Charger turned up in post today ! so can you tell me all the settings i will have to program into the Accucel-6.

I will be charging 6X UMX MiniAviation 300 mAh 30c 2S1P packs useing the 6 port charger board at 2c

Please guys can you tell me what the (c) in 2c means please (LOL Im such a newby) when it comes to parallel charging and 2 cell charging.

So if you could tell me the settings for my Accucel-6 and tell me what C means .

All your help and guidance would be very appreciated from you guys on RCgroups

I got a question,can you charge different mah lipos together,like
2-300mah
2-240mah
1- 180 mah
and 1- 160 mah ?

Originally Posted by jaylad

I got a question,can you charge different mah lipos together,like
2-300mah
2-240mah
1- 180 mah
and 1- 160 mah ?

Yes you can.

Read some of the post linked to above, and see if you can tell at what current you would need to charge them at 1C?

Yes as long as they are all the same cell count. Spend some time reading through this guys site http://www.tjinguytech.com/charging-...allel-charging it is a good read.

Originally Posted by Woody_99

Yes you can.

Read some of the post linked to above, and see if you can tell at what current you would need to charge them at 1C?

That would be 1.42

Originally Posted by jaylad

That would be 1.42

You have it!

I wasn't trying to be a smart a$$, just wanted to make sure you understood what you wanted to do.

Parallel charging is great, you'll enjoy having more batteries ready in the time it would normally take to do just one.

I understand it,I just didn't know you could charge different mah lipos,and I'm glad I can ;-)
I'm not a great flyer,so I take a very tame beast to warm up and the sbach ,just to keep my heart rate up,and now the mig,but I'm not good enough to fly it in my small park yet