HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Feb 28, 2013, 07:29 PM
Registered User
Joined Dec 2012
3 Posts
Discussion
Help

I need someone that can tell me the correct size of the barrel conector on a futabas charger.The one that goes into your tx.I need a bunch of them.I some how managed to acquire a number of radio's with no chargers.I have acquired a bunch of the old ace chargmaster chargers.Along with a bunch of the ace digipace II units and I orderd some plugs from digikey and they are the wrong size they work on hitec and nothing else does anyone know what I should order.Thank you and let me know rramjet1954@hotmail.come:
richardojohnson is offline Find More Posts by richardojohnson
Reply With Quote
Sign up now
to remove ads between posts
Old Feb 28, 2013, 10:09 PM
"Simplify, then add lightness"
Raleigh,NC
Joined Nov 2000
2,701 Posts
I have Hitec which uses 5.5x2.1mm, and everything I see says that Futaba uses 5.5x2.5mm. Those are two common sizes for 12v adapters, and the only difference is the diameter of the hole in the center and the pin on the radio. It is really a pain as about half my 12v electronic items use the 5.5x2.1mm and half use 5.5x2.5. I bought a bunch of adapters off ebay to go from one size to the other.
jeffs555 is offline Find More Posts by jeffs555
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Idea Care To Help? Looking At Ways To Promote Model Building and Helping Others Murocflyer Balsa Builders 28 Sep 27, 2014 01:34 PM
Help! Help me help my wife! Rasterize Life, The Universe, and Politics 66 Mar 19, 2013 10:26 PM
Wanted Help-Help-Help joe1 Aircraft - General - Radio Equipment (FS/W) 4 Feb 22, 2013 07:21 PM
Discussion Help help help!!!!!!! rc8b Off-road Cars 1 Feb 13, 2013 07:17 PM
Discussion Help!!!! any help with TT FM-1e would be awesome JUGGIN Motorcycles 14 Jan 30, 2013 03:14 PM