Hey you like the Dr Who I think someone should do a RC TARTIS imagine that little blue box flying around!!! What will people think?? LOL Been watching the Dr since the beginning way back in the mid 20th century

An RC TARDIS would be nice. The hard part will be how to make it bigger on the inside than it is on the outside

My SST is done and ready to fly. AUW is 22 grams with a 1S 160mah lipo.

Also if any decal peels up I brush the foam with white glued diluted with water (about 1/3 glue 2/3 water) then lay the decal back over and seems to stick OK afterwards. The motor I uses is a 6mm pager motor from an AXON P-51 kit. The prop is a GWS 2508 cut down to 2" and the the amps were about ~1.1 amp on a fresh lipo. I am getting a lot of thrust on this setup, close to 1:1 (I will measure once I get the lipos charged.)

Don

Well Gary went and did it with the F-117 and made it into a EDF and looks great you can see the ducted work he did in replace the prop area. He used the Great Planes F-86 micro guts. She tested alright for the glide and now it's time for the power flight. Along with his Valkrei we should have some video on them really soon.

Look good

But is there down thrust?

Originally Posted by NEWBEFLYER

Well Gary went and did it with the F-117 and made it into a EDF and looks great you can see the ducted work he did in replace the prop area. He used the Great Planes F-86 micro guts. She tested alright for the glide and now it's time for the power flight. Along with his Valkrei we should have some video on them really soon.

Flew my new Dynamic Foamy A380 Airbus indoors today. Very impressed how well she flies. Very stable slow flying and looks very cool when the wings flex up and down, just like the real thing.

i had ordered and received the 747 and the yak a few weeks back and i have to say i was impressed with what i got the yak went together quickly the airliner took some more time because of the decals to be put on but the result looks great. im going to be going brushless on it with one of the 2g hobby king motors i have laying around should make it a great flyer will post later about how it worked out

any new designs, and also landing gear updates?

I just ordered the MD-11 (should be here tomorrow) and plan to leave off the wingtips, add a Refueling Boom on the back, USAF decals on the side and call it a KC-10. I have the brick and servos from my first AS3X Micro Mig 15 which was destroyed in a violent accident with a lightpole. I just need to figure out what brushless motor to buy. I cant wait to fly it around the hangar when sitting alert!

Also, any thoughts on a 707 so I can make a KC-135? lol

Originally Posted by kc135boomer

I just ordered the MD-11 (should be here tomorrow) and plan to leave off the wingtips, add a Refueling Boom on the back, USAF decals on the side and call it a KC-10. I have the brick and servos from my first AS3X Micro Mig 15 which was destroyed in a violent accident with a lightpole. I just need to figure out what brushless motor to buy. I cant wait to fly it around the hangar when sitting alert!

Also, any thoughts on a 707 so I can make a KC-135? lol

You know I just might do this for you.. I was wanting to do an E-3 Sentry! (kill 2 birds with one stone) Wonder if I can bypass the pot on a HK 2.5g servo and use it to drive the disc on top

Bert

Sweet, put me down for 3 to start with

While you are at it, scale it up enough to add normal servos and sell me three of them as well. The statement about designing one made my year!

Originally Posted by kc135boomer

While you are at it, scale it up enough to add normal servos and sell me three of them as well. The statement about designing one made my year!

Well I finished the PZ brick sized model design last night. What is your idea of normal servos and equipment (battery, RX, servos and motor)

Thanks,
Bert

Awesome! When can I place my order? As for scaling up, I was just talking a park flyer size but for now I am giddy about the submicro version. I will get you some cool stuff from my Squadron sent out. PM me your t-shirt size! Thanks again! NKAWTG...N!!!

WOW! You talk about fast shipping! I just ordered this MD-11. Time to build a KC-10. Step 1... Paint

Just completed the 380 and the SST. Bert @ DF was kind enough to include a 6mm motor/prop to try out and it works fine in the 380 (cannot see it itemised on his site, but will contact him). Have searched this thread but seems to be no 'go to' 6mm motor that works out of the box -- is there such an animal? I have a Mini Vapour motor on order for what that is worth.

Also cannot find scource for a JST-SH two pin male connector pigtail for motor use --- Digikey doesn't seem to stock the 1.0mm JST's ? There must be a scource somewhere, cannot even find it as a spare part on Spektrum's site?