|Jun 14, 2013, 09:50 PM|
Lighting some foamies, turning pile of parts into beauty
Ok, I've put up some posts here in the past and am now edging back into doing some light work.
Building two night flyers, one exists, one I am trying to bang out this week.
First plane is a super EZ, two pics of the existing plane are attached, one from when I was building it, one from a crash. Huge prop in slot paper airplane, the lights will be very simple, a stripe down each wing near the edge, LEDs facing into the Dollar Tree foam. One strip down the fuse near the bottom.
Second one is a firefly, 24" ws EPP delta, some pics with lighting on them here. Will be trying to build this week.
I have lots of LEDs from Bombay, several 3s Female JST-XH balance tap pigtails, plenty of small gauge wire, even a batch of brushed ESCs pic attached.
Both nightflyers will be on 3s 1300-1800 type lipos.
I know I can use a brushed esc to hook up lights to the gear channel, but the exact configuration is eluding me. Similar with the female balance tap pigtail, I know I can run off the balance taps on the lips, do I just run the wire from the LEDs to the two outside leads on the pigtail and ignore the inside leads?
|Jun 15, 2013, 11:08 AM|
If you are using 3S batteries they attach directly to LED strip. No other devices needed unless you want to dim or flash them.
A connector that attaches to the balance tap can give you an alternate place to acquire power without cutting into the ESC wiring. Use the two outside wires on 3S, always double check with a voltmeter.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Could I turn this into a strobe light?||mycanopyisready||Micro Helis||2||May 19, 2013 08:02 PM|
|Sold||PILE"O 500 Parts.Mostly Aftermarket Some align New Nice Motor ESC 48 wlipo 59||blueindian||Aircraft - Electric - Helis (FS/W)||2||Apr 14, 2012 08:03 AM|
|Discussion||Turn some parts into a scream machine.||skyline223||Pylon Racing||5||Nov 24, 2009 08:35 PM|
|Build Log||turning the ultrafly foamy into edf.||drakonis||Foamy EDFs||25||Aug 08, 2006 10:07 PM|
|Turn your Curtek Pictures and Video into a chance to win a free lighting system!||mcu-electric||Parkflyers||0||Jun 11, 2004 05:30 PM|