|Sep 18, 2003, 06:19 PM|
How do you mount a 10x6 HD prop on a 350C Motor?
I posted this question in the GWS forum without much luck.
Can anyone here give some advise?
My new Corsair came with a 9x7 SF prop and the new 10X6 HD prop.
The nut recess for the HD prop is to large for the retaining nut on the 350C motor.
I would like to use the HD prop. There are no instructions in the manual or adapters in the kit. Was something left out about this?
Can someone tell me how you mount the HD prop correctly?
|Sep 18, 2003, 06:54 PM|
How do you mount it? The way it is it flopps all over the place. And what about the decals? They show one scheme in all the pictures, but give 5 or 6 different layouts for all the different decals. How in heavens name are we supposed to see what they look like before we apply the stickers. I have searched the web for Corsair photos to visualize these different schemes, but haven't had much luck. I like my models to be as accurate as possible, even cheap little foam ones. Tom
|Sep 18, 2003, 07:21 PM|
Try this site for marking info:
LOTS of neat stuff there.
Also, on the 10-6HD, as someone else mentioned on another thread, get a couple #4 nylon washers from Home Depot, put one on the front, one on the back with a nut on both sides of the prop and tighten it down. Works fine.
|Sep 18, 2003, 09:11 PM|
Walled Lake, MI, USA
Joined Feb 2000
Mel, I was the one who mentioned the #4 nylon washers in another thread. They work great. I've since discovered, however, that a prop saver is an even better solution. For those who don't want to bother with a prop saver, the #4 nylon washers are cheap, light and simple.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||How do you mount small DD props on cd-roms?||Argyle||Electric Motor Design and Construction||4||Apr 07, 2006 07:01 PM|
|How do you attach a loose gunther prop on shaft?||micron||Foamies (Kits)||6||Sep 24, 2003 10:01 AM|
|How do you mount a 10x6HD prop on a 350C Motor?||glenclif||GWS (Grand Wing Servo)||9||Sep 21, 2003 08:21 AM|
|How do you fit an APC Prop on GWS shaft?||JDMstuff||Power Systems||13||Aug 09, 2003 08:00 PM|
|HELP! How do you mount the orange 1047 prop on the GWS DX-A?||EFoil||Parkflyers||6||Sep 09, 2001 12:41 AM|