|Nov 08, 2012, 11:46 PM|
Joined Oct 2012
So i just got a new V4 OSD pro with altitude meter.
my problem is that if i fly away from any metal objects it works great!
But I took it on the construction site for work, there are lots of metal plates and etc around. I took off about 2m in the air and the altitude meter jumped to 12m!! it did this a couple of times.
as soon as I got about 30m in the air it worked again! ??? hmm
Is there any way to avoid this?? i.e putting in a film canister or something??
thanks in advance
|Nov 12, 2012, 08:22 AM|
Joined Jul 2006
When I get strangeness like that, It's usually because of a kink in one of the hoses from the probe to the electronices. The hoses should be cut to length and not bent at an extreme angle. I mount the electronics package as near the pitot tube as possible and use extension cables if necessary to connect them to the V4
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Hobbyking altimeter||Vegas_flyer||Sailplane Talk||59||Nov 28, 2013 10:10 AM|
|Discussion How to connect the altimeter to electric sailplane setup?||liukku||Electric Sailplanes||2||Apr 09, 2012 06:43 PM|
|Discussion Altimeter Accuracy||samc99us||Hand Launch||33||Apr 07, 2012 08:34 PM|
|Discussion Altimeter V3 - DOA||cuprum||Eagle Tree Systems||2||Mar 31, 2012 01:59 AM|
|Wanted Zlog Altimeter or How High Altimeter||Bohh33||Aircraft - General - Miscellaneous (FS/W)||1||Feb 11, 2007 10:52 AM|