Hi guys, you know I bought my A9 about almost 3 years ago with the original firmware and software version, so far worked very well with no problems at all with electric planes, in fact I'm very very happy, but now I want to upgrade it to the latest firmware and software version available 1.09(0), going to gas planes, so my question is, if just updating it to the latest software and firmware version available is it sufficient to have it fully updated?, or I need to do all the previous upgrades one by one, until reaching the last one?, and olso the receivers (6 and 7 channels) thanks in advance for your answers and help.

Originally Posted by QUEBRANTAHUESOS

Hi guys, you know I bought my A9 about almost 3 years ago with the original firmware and software version, so far worked very well with no problems at all with electric planes, in fact I'm very very happy, but now I want to upgrade it to the latest firmware and software version available 1.09(0), going to gas planes, so my question is, if just updating it to the latest software and firmware version available is it sufficient to have it fully updated?, or I need to do all the previous upgrades one by one, until reaching the last one?, and olso the receivers (6 and 7 channels) thanks in advance for your answers and help.

Open HPP-22 interface window and select latest firmware version for each of the Aurora 9,
The Spectra 2.4Ghz Module (under "etc") and the Optima transceivers.
. Hitec HPP-22 2.4GHz Programmer - Manual, FAQ - How to Install & Use (with screenshots).
note to select "update" at bottom of A9 window.
Current firmware for optimum performance:
. Aurora 9 V1.09(0) 20 Sept 2012
. Spectra 2.4Ghz Module firmware V3.01 18 April 2011
. Optima 6, 7 & 9 Ch Transceiver Firmware V2.02(0) 07 Oct 2011
. HPP-22 Software Version V1.13(0) 26 September 2012

ex Hitec USA Support Forum Sticky:
Aurora 9, AFHSS Spectra Modules, Optima Transceivers, Minima Receivers
& Telemetry - FAQ & Undocumented Features
- Mixes, Setups, Tips. {Individual Links often updated}

Alan T.
Alan's Hobby, Model & RC FAQ Web Links

Originally Posted by A.T.

Open HPP-22 interface window and select latest firmware version for each of the Aurora 9,
The Spectra 2.4Ghz Module (under "etc") and the Optima transceivers.
. Hitec HPP-22 2.4GHz Programmer - Manual, FAQ - How to Install & Use (with screenshots).
note to select "update" at bottom of A9 window.
Current firmware for optimum performance:
. Aurora 9 V1.09(0) 20 Sept 2012
. Spectra 2.4Ghz Module firmware V3.01 18 April 2011
. Optima 6, 7 & 9 Ch Transceiver Firmware V2.02(0) 07 Oct 2011
. HPP-22 Software Version V1.13(0) 26 September 2012

ex Hitec USA Support Forum Sticky:
Aurora 9, AFHSS Spectra Modules, Optima Transceivers, Minima Receivers
& Telemetry - FAQ & Undocumented Features
- Mixes, Setups, Tips. {Individual Links often updated}

Alan T.
Alan's Hobby, Model & RC FAQ Web Links

What he ment to say is yes.

You can skip right to the newest one.
Make sure you check your programs after the update as some stuff might not work as before.


I would recommend you also upgrade your tx module and all your rx.
If you upgrade the tx module the rx must be upgraded as well and re-bound)