Nice puzzle without manual but next time make more parts that i have more time to play.
Some shimming is needet to get a it play-free but it is feasible. On the roll shaft 4 aditional washers between the bearings are needet for a friction free run.
Over all it looks very solid and reasoned.

When i have found out how to mount it on my DIY LG i will make a mirrorvideo.
To be continued........









Greetings
Teramax

ps.: OZ, there´s no screw long enought for roll axle in the bundle.

Originally Posted by teramax

Nice puzzle without manual but next time make more parts that i have more time to play.
Some shimming is needet to get a it play-free but it is feasible. On the roll shaft 4 aditional washers between the bearings are needet for a friction free run.
Over all it looks very solid and reasoned.

When i have found out how to mount it on my DIY LG i will make a mirrorvideo.
To be continued........









Greetings
Teramax

ps.: OZ, there´s no screw long enought for roll axle in the bundle.

Congratulations Teramax,it is hardjob without guide.I prepared guide,now it is online.
I noted short screw matter,yes you are right,there are 4x45mm and 1x40mm screws,40mm is not enough
I changed short roll shaft,too.
Part list changed after your assembly,thanks.
Waiting for some video shots.
best regards
Ozan

Nice !!!
i want one
But what's the weight of this gimbal including servos ?
The aluminium tubes are 16 mm ??
I should replace them with carbon fiber tube so.

Waiting for more pictures and videos !

hi.. anyone have a test flight with a ThreeDee 3 Axis Gimbal on a hex setup? how it performs??? and does it include its own gimbal control at 499$? or need to purchase separately? and what gimbal control is recomended and tested? im interested to this. i plan to mount it on my octo.

Originally Posted by 7subaru4

Nice !!!
i want one
But what's the weight of this gimbal including servos ?
The aluminium tubes are 16 mm ??
I should replace them with carbon fiber tube so.

Waiting for more pictures and videos !

TwoDee EVO weight ~480gr w/o servos.
Aluminium tubes diameter is 16mm.
you can replace them with carbon fiber,carbon tube version will be ready,soon.

Originally Posted by ozanozkok

TwoDee EVO weight ~480gr w/o servos.
Aluminium tubes diameter is 16mm.
you can replace them with carbon fiber,carbon tube version will be ready,soon.

Thanks for the reply !
Ok then
I'll buy it next week.

I think the pulley are not included ?? that why you ask client to choose between Futaba and Hitec mounts ?

Which maximum weight can it take, i mean what would be the most heavy reflex i could put on it ?? 1kg ?

Originally Posted by 7subaru4

Thanks for the reply !
Ok then
I'll buy it next week.

I think the pulley are not included ?? that why you ask client to choose between Futaba and Hitec mounts ?

Which maximum weight can it take, i mean what would be the most heavy reflex i could put on it ?? 1kg ?

Our servo pulleys are universal,we are using special spline form.you can use it with hitec or futaba and kit includes pulleys.
with 3:1 ratio and hs5565 servo,you can use cameras up to ~1.5kg.

hi.. anyone have a test flight with a ThreeDee 3 Axis Gimbal on a hex setup? how it performs??? and does it include its own gimbal control at 499$? or need to purchase separately? and what gimbal control is recomended and tested? im interested to this. i plan to mount it on my octo.

For $499 it does not include a gimbal controller.

You'll have to buy a Radian, Skyline, HFP controller, Picloc, Multiwii, or whatever other standalone controller you want to use.

Originally Posted by ozanozkok

Our servo pulleys are universal,we are using special spline form.you can use it with hitec or futaba and kit includes pulleys.
with 3:1 ratio and hs5565 servo,you can use cameras up to ~1.5kg.

will the free fly servos work? can I buy the gimbal assembled?

anyone sample video of ThreeDee 3 Axis Gimbal using the gimbal control??

Originally Posted by vip

will the free fly servos work? can I buy the gimbal assembled?

Yes,you can use freefly servos,they are same with futaba.

when will the carbon tubes be available?

Originally Posted by vip

when will the carbon tubes be available?

Carbon version of TwoDee EVO will be available in ~15 days.We are waiting for carbon tubes deliver to us.

Ozan, any idea when I can expect my refund for the bad servo I had to replace and the replacement pot? I PMed you about this, but again, didn't get a reply. Why do I have to contact on an open thread to get a response?