|Mar 01, 2013, 01:20 AM|
Joined Jul 2004
Optima 9 rx burned!
Lifepo connected to RX.
Ubec connected from RX to light controller module (convert 6.6V to 5V)
ch7 to light controller module.
I started getting bad behaviour from rx, light unit did not respond to my commands and initialization anymore ( I had tested this setup many times before)
I switched CH7 plug to CH6 and then I heard sizzling sound , burning smell and now RX is dead!
I opened the case for Rx and it smells burned but no solid scorch marks near any visible components.
Any help? I sent email to germany multiplex( nearest place) but just wanted to ask what the hell could have gone wrong?
I have never ever had burned rx before, and this one has never flown! It has been sitting on my drawer for two years now.
|Mar 01, 2013, 02:55 PM|
Joined Aug 2002
2. EP or GP model?
3. "Lifepo connected to RX".
a. Direct into SPC or is SPC plug in place and battery switch harness is then into which channel?
b. Fully charged, a 2s Life at 7.2v is above that recommended for majority of servo and close
to limit for an Optima. Any problem with any servo, connection lead etc will be accentuated/fed back.
4. "Ubec connected from RX to light controller module (convert 6.6V to 5V) ch7 to light controller module. "
Any UBEC to power an external item should be connected direct to battery,
never drawing power through Rx.
If this was indeed (+) & (-) out of ch7, how was the module connected to Rx for signal?,
5. Ideal setup, if an EP Model, would be for the battery to be plugged into the SPC port
and the UBEC to be connected as shown schematic:
. Optima Transceiver (RX) - SPC connection & Lead FAQ for EP & GP models.
This will provide for best voltage for Optima and the servo, module etc being max 6.0v set by UBEC.
Alan's Hobby, Model & RC FAQ Web Links
|Mar 01, 2013, 11:07 PM|
Joined Jul 2004
It may be that something was just shorting out the rx , there was quite a mess on my table when I tested this ( wires etc, just accident waiting to happen as usual..)
I already ordered a new Rx and my friend can check out the burned one if its salvageable for usage in cheaper models. (if only some component has burned out and changeable..)
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Aurora 9 Radio x2 Optima 6 RX and x1 Optima 7 RX||prozac||Aircraft - General - Radio Equipment (FS/W)||3||Feb 26, 2013 07:48 PM|
|Sold||RX - Hitec Aurora 9 - MINT - TX - Optima 9 - Programming Card - MINT||FlySkyVideo - Ecibob||Aircraft - General - Radio Equipment (FS/W)||2||Jan 29, 2013 05:20 PM|
|Sold||Hitec Optima 9 & Optima 7 RX||joe1l||Aircraft - General - Radio Equipment (FS/W)||5||Feb 15, 2011 09:52 PM|
|Wanted||Trade Hitec Optima 7 RX + $ for a Hitec Optima 9 RX||cjdscratch||Aircraft - General - Radio Equipment (FS/W)||0||Dec 01, 2010 10:45 PM|
|For Sale||optima 7 and optima 9 RX for sale......||andrewfl||Aircraft - General - Radio Equipment (FS/W)||3||May 27, 2010 01:07 PM|