|Feb 14, 2013, 12:06 AM|
San Marcos, CA
Joined Aug 2009
Trader Rating: 65
Hacker P-51 Reno Racer 840mm + Extras
Selling my Hacker P-51 Reno Racer.
I modified this as a FPV Racer - however Flight times were little and I upgraded to the 1200mm Version which can carry a larger 3S with better flight times.
This one is RX-Ready - and optimized for FrSky .. I leave the two Antennas (as shown in the pictures) in there - since I glued them to the foam.
Since this one was a FPV plane, I actually reinforced the entire fuselage and wing with carbon fiber.
For night flying I added red LED strips that can turned on and off with a switch next to the ESC.
I had about 3x flights with this setup, but very quickly figured out that it's impracticable for FPV Racing.
- 3x 9gr Corona Digital Metal Gear Servo's (1x 929MG, 2x 939MG)
- Turnigy AE-30A Brushless ESC
- Turnigy Aerodrive SK3 - 2830-1130kv Brushless Outrunner
Also included are 4x Zippy Compact 1500mAh 3S 25C LiPo's - I only used 2x during my test flying and the other two have been never used.
Basically everything is almost new, however since I modified the plane from the standard, it looks a bit "beat-up" - I had the transmitter on the back and the camera on a servo in the cockpit. Original cockpit of course included.
Btw, this is a fast one :-)
I invested more than $180 .. asking $160 shipped CONUS.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Found||Hacker EPP P-51 or Reno Racer||flyandi||Aircraft - Electric - Airplanes (FS/W)||0||Jan 15, 2013 10:45 PM|
|Build Log||P-51 Macumba Racer Team - First Brazilian Team on Reno Racer||Thunder For||Foamies (Scratchbuilt)||4||Jan 05, 2013 02:05 AM|
|Wattage P-51 Reno Racer (Pylon)||jocappy||High Performance||11||Sep 30, 2009 01:30 PM|
|P-51 Reno Racer||Robert Belluomini||Scale Kit/Scratch Built||7||Jun 05, 2002 11:25 AM|
|New plane!!! Wattage P-51 Reno racer????||ttnissan||Foamies (Kits)||14||May 24, 2002 10:37 PM|