|May 07, 2010, 12:16 PM|
Joined May 2010
High powered servo?
I had a project I wanted to run by you guys.
I have a camera on a rig with some castors and it moves in a track. I need the whole rig to move back and forth in this track, and I need a pretty high degree of precision as to the position. So I wanted to hook up a servo/stepper motor to a push rod and have it move the thing to a position depending on the computer input.
I'm comfortable with the setup/wiring, but I was wondering if it's feasible to get this much force out a servo/stepper.
Here's the numbers:
The track will be 6-12 inches long, and the rig needs to move to any position somewhere on the track.
The rig can be a little heavy, so I'm thinking about 10-15lbs of force are needed to push it back and forth.
I don't need really high speed, but if I could get 5-10 inches per second, that would be great.
I'd like to be precise about the position, say += 1/2 inch, which is why I thought of servos.
So is this doable or is it way too much torque/power for a servo/stepper motor? And if not, anyone know where I could get a motor like this for (relatively) cheap?
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Futaba S133 for aileron servo in .40 sized e-powered scale biplane||insalacosm||Radios||6||May 05, 2010 01:10 PM|
|Help!||High Powered Rocket Radio?||seg9585||Rocketry||5||Apr 23, 2010 05:57 PM|
|Idea||high powered free flight||7seconds||Free Flight||21||Apr 17, 2010 06:10 AM|
|Help!||Servo Powered Quad for School.||boredom.is.me||Radios||7||Apr 09, 2010 11:45 PM|
|Discussion||High powered fan test bed suggestions||strictlyscale||Electric Ducted Fan Jet Talk||4||Sep 13, 2009 07:26 PM|