Motor database from the motors I have.
I measured them at 100g/200g/300g/400g/Max trust

I use the Unilog as test tool,



The way I measurer the trust,




Keda A20-22L (924KV) with GF 10x4.5 prop





One more time the Keda A20-22L with a 11x4.7 SF prop



Keda A20-28M (1050KV) with 8x4.5 Gaui prop





One more time the Keda A20-28M with a GF 10x4.5 prop much better than the Gaui prop!!



Keda A20-50S (1088KV) with 8x4.5 Gaui prop





One more time the Keda A20-50S with a GF 10x4.5 prop



Emax CF 2822 (1200KV) with 8x4.5 Gaui prop





One more time the Emax CF 2822 with a GF10x4.5 prop



HexTronik DT750 (750 KV) with 11x4.7 SF prop





Gaui 330X GM-410 (1050 KV) Scorpion motor with 8x4.5 Gaui prop





One more time the Gaui 330X GM-410 with a GF 10x4.5 prop



Turnigy 2209 26turn (Keda KD2209/26) (1130kv) met 8x4.5 Gaui prop





KD A22-10S (Keda A22-S) (1200KV) met 8x4.5 Gaui prop






Avroto M2814-11S short shaft (770KV) with a 11x5 Graupner E prop

The Avroto next to the Keda A20-22L,



4S lipo,


5S lipo,

Avroto M2814 (2 min 39 sec)

RC-Timer BC-3536/11 (750KV)



Log with a Graupner E 11x5 prop on 4S


Log with a APC E 12x8 prop on 4S



Axi 2814/22 (765KV)



Log with Xoar 14x5 wood prop on 4S


Log with Xoar 14x5 wood prop on 5S


Log with APC 14x4.7 SF on 4S


Log with APC 14x4.7 SF on 5S



Log with APC 12x3.8 SF on 4S



Log with APC 12x3.8 SF on 5S



Log with Graupner E 11x5 on 4S



Log with Graupner E 11x5 on 5S





RC-Tiger MT2814-10 (770KV)




Log with Xoar 14x5 wood on 4S



Log with Xoar 14x5 wood on 5S



Log with APC 14x4.7 SF on 4S



Log with APC 14x4.7 SF on 5S



Log with APC 12x3.8 SF on 4S



Log with APC 12x3.8 SF on 5S



Log with Graupner 11x5 on 4S



Log with Graupner 11x5 on 5S




RC-Tiger 2208-18



8X4,5 Prop


10X4,5 Prop

hey thx for taking the time!
i just bought these motors for both my new quads.
Keda A20-22L
Keda A20-50s

No thanks,

It was fun the do, and what else can you do when it is raining

And I love the Keda's, see also my building thread of the Pacman KK quadcopter.

+1 for Keda Thumrun 2834/22 on my tri

Added the Avroto M2814-11S short shaft to the list.

Added the Avroto M2814-11S on 5S lipo + video

Originally Posted by holco

Added the Avroto M2814-11S on 5S lipo + video

That is a very kick ass motor.
But since you write in English in the forum, is it too much to ask to have the graphs in English too? ~

I do not know how to translate Dutch lines into English lines

Spannung = Volt
Strom = Amp
Leistung = Watts
Drehzahl = RPM

Holco, great job! This is a very interesting practic test! Have you ever think in make a test with Rctimer motors like 2836, 2830... Im waiting an answer from kedamodels to buy some 22-20l, but they dont say nothing at the moment and maybe i buy some rctimer motors in order to try them.
Im thinking in make 2 quads. One small(30cm M2M) with 20-50s and one medium(50cm M2) with 20-22l.
Whats you opinion at the time to choose alternative motors for this measures?

Hi xforus,

Every motor that I have tested and put in the database I do actually have or had 5x > 7x time's, for me it is to expensive to test every single motor that's look interesting, bud if you send me one with the prop you like to use I will test it for you and put the results in this database.

For now I love the Keda motors in the low price category bud for your small quad I recommend you the Turnigy 2209 26turn (Keda KD2209/26) (1130kv) with the 8x4.5 Gaui prop's

Mario

Originally Posted by xforus

Holco, great job! This is a very interesting practic test! Have you ever think in make a test with Rctimer motors like 2836, 2830... Im waiting an answer from kedamodels to buy some 22-20l, but they dont say nothing at the moment and maybe i buy some rctimer motors in order to try them.
Im thinking in make 2 quads. One small(30cm M2M) with 20-50s and one medium(50cm M2) with 20-22l.
Whats you opinion at the time to choose alternative motors for this measures?

somebody send this man some motors! (all i have is dt750's and avroto 2814's, or i would gladly oblige)

I ordered m3 rubber dampers for the Avroto M2814 motors assuming that it will cancel some vibes at the source, the outcome confuses me

The two test's where with exactly the same trottle setting (max endpoint) and tuned at 670g lift


The dampers,


Left is with dampers right without them,

Avroto Motor dampers (0 min 20 sec)

To have a true picture of the vibrations you need to see both frequency and amplitude. I don't know what that number connotes...I'm guessing amplitude. It's likely an increase in a lower frequency possibly due to resonance. I'm betting most high freq. vobrations were removed. Try doing a mount with half rubber mounts and half mounts secured solidly. or better yet 3 and 1. Good luck

So maybe I need an other application on my iphone, can you recommend me one?

How about this?