Images

W4HFV · Oct 12, 2011, 01:45 PM

This was a project that i lost interest in. Frame is carbon fiber and the arms are 10mm aluminum. I ran each motor up individually to determine the rotation and amp draw but this has never been hooked to electronics or flown. Deserves a better home. Has the Pulso X2208 motors. http://montorc.com/x220834.aspx and the pulso Esc's found here http://montorc.com/dl11a.aspx Motors are $41 each and the esc were $22 each. Comes with an extra arm, mikrokopter cover and a bunch of extra 8" props. Asking $230 for everything OBO. Ill take care of the shipping too. Email me at w4hfv@juno.com or call me at 704-201-4644 with any questions.

zuby1 · Oct 12, 2011, 01:56 PM

No flight controller?

W4HFV · Oct 12, 2011, 01:59 PM

Nope you can use ardupilot Mega or similar. There is like 6 out now.

AUSUAV · Oct 13, 2011, 01:25 AM

Would you be interested in posting to Australia?

Cheers
Aaron

AP7d · Oct 13, 2011, 04:55 AM

Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?

Z06 Tony · Oct 13, 2011, 08:09 AM

Quote:

Originally Posted by AP7d

Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?

That is not correct. I have stable quads running 2000kv motors. As a rule of thumb generally the higher the kv the smaller the prop. So when u build a quad u choose your motors based on your weight and frame/prop size. Those are good motors and will work nice with that size quad.

kd4wen · Oct 14, 2011, 08:03 PM

Is this package still up for sale?

W4HFV · Oct 24, 2011, 08:37 AM

still for sale

W4HFV · Oct 28, 2011, 08:20 PM

bump

AP7d · Oct 29, 2011, 10:37 AM

Have you flown this thing? On the montorc website it says that pulso esc's are super advanced and you might run into problems with them running multicopters.

W4HFV · Oct 30, 2011, 09:33 PM

It says the advanced functions are not suitable for quad rotors. Use the basic ones that are programmed in right now and you should be fine. I programmed these with the program card and they seemed to do fine.

Oct 12, 2011, 01:45 PM	#1
W4HFV Registered User Joined Jul 2010 13 Posts Trader Rating: 1	Small Carbon Quad frame with Pulso motors and esc's This was a project that i lost interest in. Frame is carbon fiber and the arms are 10mm aluminum. I ran each motor up individually to determine the rotation and amp draw but this has never been hooked to electronics or flown. Deserves a better home. Has the Pulso X2208 motors. http://montorc.com/x220834.aspx and the pulso Esc's found here http://montorc.com/dl11a.aspx Motors are $41 each and the esc were $22 each. Comes with an extra arm, mikrokopter cover and a bunch of extra 8" props. Asking $230 for everything OBO. Ill take care of the shipping too. Email me at w4hfv@juno.com or call me at 704-201-4644 with any questions. Images View all Images in thread Views: 148 Views: 122 Views: 125 Views: 102

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sold New small quad frame. and another twin frame	tc3wins	Aircraft - Electric - Multirotor (FS/W)	6	Sep 29, 2011 11:11 AM
For Sale Daedalus Frame (Carbon Fiber) with motors esc FC	tom6696950	Aircraft - Electric - Multirotor (FS/W)	8	Sep 04, 2011 03:57 PM
Sold RTF COMBO - Foldable Quad frame, motors and ESC with KK board	kevinlib	Aircraft - Electric - Multirotor (FS/W)	9	Aug 07, 2011 12:30 PM
Sold Foldable Quad frame, motors and ESC with free KK board	kevinlib	Aircraft - Electric - Multirotor (FS/W)	6	Jun 23, 2011 12:12 PM
Discussion Gaui 330x Quad Flyer UPGRADED!! New Motors. New ESC's, MIKROCOPTER FRAME!	djdaveq	Multirotor Talk	9	Jul 13, 2010 05:20 AM

Images

RCG Sites

About RCG

Features

Tools

Media

Topics

Oct 12, 2011, 01:56 PM	#2
zuby1 EASILY ANNOYED United States, MI, New Buffalo Joined Aug 2011 135 Posts Trader Rating: 7	No flight controller?

Oct 12, 2011, 01:59 PM	#3
W4HFV Registered User Joined Jul 2010 13 Posts Trader Rating: 1	Nope you can use ardupilot Mega or similar. There is like 6 out now.

Oct 13, 2011, 01:25 AM	#4
AUSUAV dub dub dub dot ausuav dot com Australia, VIC, Geelong Joined Feb 2005 183 Posts Trader Rating: 2	Would you be interested in posting to Australia? Cheers Aaron

Oct 13, 2011, 04:55 AM	#5
AP7d Registered User Joined Oct 2011 24 Posts Trader Rating: 2	Hey I shot you an email, have you tested the 1100kv motors? I have always understood anything over 1000kv was kinda unstable for a quad, how did it work for you?

Oct 14, 2011, 08:03 PM	#7
kd4wen Just a yard bird Las Vegas Nv. Joined Mar 2007 1,825 Posts Trader Rating: 0	Is this package still up for sale?

Oct 24, 2011, 08:37 AM	#8
W4HFV Registered User Joined Jul 2010 13 Posts Trader Rating: 1	still for sale

Oct 28, 2011, 08:20 PM	#9
W4HFV Registered User Joined Jul 2010 13 Posts Trader Rating: 1	bump

Oct 29, 2011, 10:37 AM	#10
AP7d Registered User Joined Oct 2011 24 Posts Trader Rating: 2	Have you flown this thing? On the montorc website it says that pulso esc's are super advanced and you might run into problems with them running multicopters.

Oct 30, 2011, 09:33 PM	#11
W4HFV Registered User Joined Jul 2010 13 Posts Trader Rating: 1	It says the advanced functions are not suitable for quad rotors. Use the basic ones that are programmed in right now and you should be fine. I programmed these with the program card and they seemed to do fine.