Can we order yet????

Can't order yet, but it will be soon.. I keep hitting refresh..

Got a lot of time on one last night. They just keep getting better. Kinda hard to believe flat foam could be made to fly so well

Originally Posted by jsmith285

Got a lot of time on one last night. They just keep getting better. Kinda hard to believe flat foam could be made to fly so well

Yeah! I flew the prototype at FLI..... Flew amazing

Got a lot of time on one last night. They just keep getting better. Kinda hard to believe flat foam could be made to fly so well

Joe, you are an incredible 3D pilot, from the 33" Extra 330, to the 126" Slick, you are a joy to watch fly... Thanks for your efforts!

Originally Posted by four stroke pwr

Joe, you are an incredible 3D pilot, from the 33" Extra 330, to the 126" Slick, you are a joy to watch fly... Thanks for your efforts!

I'm. Joes dad. Thanks for your comments

Thanks Mr. Smith.. I figured you could deliver the message!

Originally Posted by four stroke pwr

Thanks Mr. Smith.. I figured you could deliver the message!

Yep I can
The 38 epp slick is amazing. I've had numerous MS composite epp planes with actual airfoils and none of them flew better than this slick does.

Can you give us details on electronics? A foamy this size is what i am looking for. Thanks Kelly

Originally Posted by kellyzo6

Can you give us details on electronics? A foamy this size is what i am looking for. Thanks Kelly

Not to cut in, but I'm certain the motor they are using in the sneak peak video is an unlabled Suppo 2212 motor or clone. This is the motor I use along with a 18 amp or 20 amp ESC in my similar sized/constructed planes. I use the Suppo 2212/13 1000KV 47g with a 10x4.7 SF prop. You could also run the 1400KV version with a smaller prop. I've got hundreds of flights on these motors and they've been rock solid with great power. I use 9g servos and anything from a 850mAh to a 1350mAh 3S battery.

Hacker A20-26m or A20-20l
3cell 900-1350
Hitec hs65 in ours

Thanks guys

Originally Posted by khen

Not to cut in, but I'm certain the motor they are using in the sneak peak video is an unlabled Suppo 2212 motor or clone. This is the motor I use along with a 18 amp or 20 amp ESC in my similar sized/constructed planes. I use the Suppo 2212/13 1000KV 47g with a 10x4.7 SF prop. You could also run the 1400KV version with a smaller prop. I've got hundreds of flights on these motors and they've been rock solid with great power. I use 9g servos and anything from a 850mAh to a 1350mAh 3S battery.

If the motor is from lukes r.c. planes like the video says than it is a suppo.

Almost here

Its Here

3D Hobby Shop 38-epp-AJ slick-pilot Joe Smith (6 min 21 sec)