|Oct 11, 2013, 10:25 AM|
Joined Jul 2013
9XR- No throttle on Phoenix RC 3
I have the 9XR plugged to the computer through the USB to JR trainer cable,
The module is not connected and there is a new model on the remote for the simulator.
The simulator recognizes the remote and gets signals from it, except that I have no throttle control..the simulator does not recognize the throttle channel at all, but all other channels work just fine..
What seems to be the problem?
|Oct 12, 2013, 04:15 AM|
I have the same exact problem on mine.
I fixed it by creating a new model called "Simulator" in which I put the throttle input on a channel other than channel 1. All the other channels stayed the same. It's cheesy, but it works. And since all the other funky stuff I'm doing with my mixes have no real bearing on the simulators I'm using, this gives me a clean slate to work from.
|Oct 12, 2013, 11:16 PM|
You should be able to go to the Mixes menu for that model, scroll down to some channel (#5 or #6 works with most simulators), create a new mix that's 100% throttle. In the simulator, select that channel as your throttle. That should get you up and running.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Yawing without throttle change on 9XR||buttonmoon||Multirotor Talk||7||Jul 02, 2013 05:11 AM|
|Discussion||9XR w/ OrangeRX module - HZ Super Cub no throttle response||prskier17||Radios||9||Jul 01, 2013 07:07 PM|
|Discussion||SimonK F30A's, 9XR - No throttle till 50%||MrBen.||Multirotor Talk||6||Mar 18, 2013 05:11 AM|
|Discussion||Phoenix sim with DX6I and Blade SR Heli - No Throttle Control||Jack1950||Simulators||1||Feb 13, 2013 07:22 PM|
|Discussion||Throttle inverted on phoenix 4 with turnigy 9x - please help||leopereira||Simulators||3||Jan 15, 2013 05:19 PM|