DJI have now released their new Naza H, with optional GPS.

http://www.dji-innovations.com/produ...za-h/overview/

DJI Naza-H 3D Flight (3 min 4 sec)

how much is it? I hope it's cheaper than the tarot zyx

Julio Memba - Tarot ZYX (2 min 49 sec)

It's not Comparable to the "cheap" zyx! You should check out the spec list....Attitude mode, position hold, fail safe, etc..plus more free upgradable features in the future.

that's sounds good to me, now tell me the price.

Originally Posted by pitchp

that's sounds good to me, now tell me the price.

The lowest price you will currently find on ANY GPS flybarless system out there, and from a proven company that makes and sells very high end GPS equipment.

http://www.atlantahobby.com/Store/pc...idcategory=942

Just bought the GPS version, looking for a 450 or 500 FBL platform.

I'll get some videos and get a few test flights on video as soon as possible.
I love the Naza-M, and can;t wait to see how the Naza-H performs!

Any suggestions on a electric heli FBL BNF that's under $400 and has room for this?
Preferably belt driven.

Oh yeah, the total was $469 shipped CONUS Express

Originally Posted by Bearsa LLC

Just bought the GPS version, looking for a 450 or 500 FBL platform.

I'll get some videos and get a few test flights on video as soon as possible.
I love the Naza-M, and can;t wait to see how the Naza-H performs!

Any suggestions on a electric heli FBL BNF that's under $400 and has room for this?
Preferably belt driven.

Oh yeah, the total was $469 shipped CONUS Express

Why does it have to be BNF? You could go with one of the new Blade 450X products and they have the 500 coming soon if you must go that route. Do you have a proper computer TX already? You are going to need a real TX in order to switch between the different modes with this setup, and not some cheap TX that will come with a RTF heli.

Here is the manual, knock yourself out. No BNF, FC with GPS only. It will work for 450 - 700 helis.

Originally Posted by Xrayted

Why does it have to be BNF? You could go with one of the new Blade 450X products and they have the 500 coming soon if you must go that route. Do you have a proper computer TX already? You are going to need a real TX in order to switch between the different modes with this setup, and not some cheap TX that will come with a RTF heli.

Futaba 8FG with D-Bus Receiver for main controls
Spektrum DX5e for camera controls, ptz, and lights.

Originally Posted by Tahoe Ed

Here is the manual, knock yourself out. No BNF, FC with GPS only. It will work for 450 - 700 helis.

So...I eventually want to use a nitro heli - any luck on the Naza-N supporting that yet?

Also I've got around $500 to spend on the following:
500 Class Electric
Durable - Metal Frame preferable even at expense of weight
Belt Drive - unless there is a much better reason for shaft
ESC, Motor, and Servo's included

Also...do I need the stock gyro or does the naza-n cover this?

I think some of the 3D videos from IHRC were done with Nitro Helis. I don't fly them so I can't comment. My WKH is mounted on my TRex 550E FBL. It is a sweet set up. Looking at the set up the Naza H it appears that it has some easy set up procedures vs the WKH. I have a TRex 500E FBL setting in my loft that I am thinking about putting one one.

Originally Posted by Bearsa LLC

Futaba 8FG with D-Bus Receiver for main controls
Spektrum DX5e for camera controls, ptz, and lights.



So...I eventually want to use a nitro heli - any luck on the Naza-N supporting that yet?

Also I've got around $500 to spend on the following:
500 Class Electric
Durable - Metal Frame preferable even at expense of weight
Belt Drive - unless there is a much better reason for shaft
ESC, Motor, and Servo's included

Also...do I need the stock gyro or does the naza-n cover this?

Ah, I see you have the TX portion covered then. You will not need a tail gyro. The unit has one built in.

You should be able to find one used in good shape for that price. Sell the controller and you are set. Forget about the metal frame. The CF frames are very durable. I have only broken one in 4 years and the replacements are inexpensive. It is just a PIA to repair.

Originally Posted by Tahoe Ed

You should be able to find one used in good shape for that price. Sell the controller and you are set. Forget about the metal frame. The CF frames are very durable. I have only broken one in 4 years and the replacements are inexpensive. It is just a PIA to repair.

Agreed.......metal bends and requires a complete tear down for any crash. CF will flex, and I have had some really bad crashes and have never broken a CF frame yet. Only cheap clones come with metal frames, and even they are rare these days.

Originally Posted by Tahoe Ed

You should be able to find one used in good shape for that price. Sell the controller and you are set. Forget about the metal frame. The CF frames are very durable. I have only broken one in 4 years and the replacements are inexpensive. It is just a PIA to repair.

Wait why sell the controller?

With the Naza H you won't need it or the gyro.