HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jan 26, 2013, 07:59 AM
ich bauen groß modell flugzeug
Keenan smith's Avatar
United Kingdom, London
Joined Dec 2010
6,834 Posts
Build Log
200% 90mm EDF Jetset44 Super Bandit sport jet build

Being that i had just finished my AU117 40mm F-35A i dedcided that i will build a sport jet of some type of sport jet for a 90mm EDF powers system i had sitting around doing nothing i may aswell build a plane around it... so after some searching i came across Jetset44's Super Bandit EDF and instantly fell for it so i wrote up a plan of action :

Scale Super bandit plans to 210% for poster printing (52 sheets)

Super Bandit Shopping list:

.C90 12B Replacement blades and Carrier(just in case)
http://www.hobbyking.com/hobbyking/s..._Fan_Unit.html $19
.7 Sheets of 6mm Depron
.1 Sheet of 3mm Depron
.4x 1m long Hollow CF Rods
.Hot glue sticks
.x4 Tubes of UHU Por
.2mm ply & balsa
.5S Capable Lipo Charger
.Retracts and struts?
.Pin hinges
.linkage stoppers
.Wheel collars
.Servo linkage covers
.Finishing Epoxy
.2x Flat 3mm CF strip
[COLOR="rgb(72, 61, 139)"].Wheels[/COLOR]
.Control horns
.Battery straps x2
.Velcro M/F
.High AWG servo extensions
.2mm Drafting Mylar: http://www.hobbyking.com/hobbyking/s...C_1_Metre.html $1.99
.Parklite In Black and Gold
.Multi-tool
.Leaded Solder
.Bullet Connectors
.Lighter
.x2 Sullivan or Dubro FLexi-cable Linkages

To Do List :

.solder on Connectors on motor and ESC
.Solder up Wiring Harness For Wings
.Build and Sheet Wing in Balsa
.build Battery Tray, Wing-box and EDF as One piece (build fuse around it)
.Fit EDF, ESC and Lipo and Route Extensions
.build Fuselage
.build Cooling Vents into Fuse, Just below Canopy and in-front of intakes
.Build the Bandit as Round and Smoothed And Sleek As possible
. Fiberglass Wing
.Cut and hinge Contorl Surfaces
.Decide on Full Flying stabilizer or not

i will print the plans tomorrow and Begin building soon afterward

K
Keenan smith is offline Find More Posts by Keenan smith
Last edited by Keenan smith; Jan 26, 2013 at 06:21 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 26, 2013, 09:26 AM
Do it Right, the first time!
CoolerByTheLake's Avatar
United States, MN, Hermantown
Joined Dec 2008
5,608 Posts
Here's build from back in April 2011

SUPERBANDIT..like BVM!! EDF 4.5" now you can made at home!!
http://www.rcgroups.com/forums/showthread.php?t=1417066

photo album link still works
CoolerByTheLake is offline Find More Posts by CoolerByTheLake
Reply With Quote
Old Jan 26, 2013, 06:22 PM
ich bauen groß modell flugzeug
Keenan smith's Avatar
United Kingdom, London
Joined Dec 2010
6,834 Posts
Edited First post ...

**this post is reserved for a Future update. **
Keenan smith is offline Find More Posts by Keenan smith
Reply With Quote
Old Jan 26, 2013, 08:38 PM
Registered User
Waltjg's Avatar
Crystal River Fl.
Joined Jul 2008
3,681 Posts
Keenan, should be a good build, but, you'll need a larger battery..w
Waltjg is offline Find More Posts by Waltjg
Reply With Quote
Old Jan 26, 2013, 09:48 PM
Registered User
D_FAST's Avatar
Denver CO
Joined Apr 2008
2,085 Posts
4000 min
D_FAST is offline Find More Posts by D_FAST
RCG Plus Member
Latest blog entry: Dassualt Alpha Jet
Reply With Quote
Old Jan 26, 2013, 10:16 PM
Do it Right, the first time!
CoolerByTheLake's Avatar
United States, MN, Hermantown
Joined Dec 2008
5,608 Posts
In the photo in the first post, of the fan, the caption reads" EDF With 1500kv motor Fitted 2.5kg of thrust which is around 7.6lbs"

The 7.6 lbs should read 5.5 lb thrust. You would need 3.45Kg thrust to get 7.6lbs.
CoolerByTheLake is offline Find More Posts by CoolerByTheLake
Reply With Quote
Old Jan 27, 2013, 04:59 AM
ich bauen groß modell flugzeug
Keenan smith's Avatar
United Kingdom, London
Joined Dec 2010
6,834 Posts
Oops ... Got my menta convrsions wrong.... Ill order another battery in a few days probably a 5000mah 5s 60c nano tech .....
Im goint to b printing the plans laer today so updates will b here a little later on

K
Keenan smith is offline Find More Posts by Keenan smith
Reply With Quote
Old Jan 29, 2013, 12:33 AM
Fremont, CA
United States, CA, Fremont
Joined Jan 2009
1,667 Posts
Watching...
djacob7 is online now Find More Posts by djacob7
Reply With Quote
Old Jan 29, 2013, 08:58 AM
Registered User
alexandermh's Avatar
Fairborn, OH
Joined Nov 2009
544 Posts
Quote:
Originally Posted by Waltjg View Post
Keenan, should be a good build, but, you'll need a larger battery..w
And probably a more robust ESC but you should be able to verify when testing the power set-up on a test stand.
alexandermh is offline Find More Posts by alexandermh
Reply With Quote
Old Jan 29, 2013, 09:25 AM
ich bauen groß modell flugzeug
Keenan smith's Avatar
United Kingdom, London
Joined Dec 2010
6,834 Posts
On 5s i was drawing 95A WOT so for 6s operations ill upgrade to a 120A HV Esc ...
Keenan smith is offline Find More Posts by Keenan smith
Reply With Quote
Old Jan 29, 2013, 11:49 AM
Registered User
alexandermh's Avatar
Fairborn, OH
Joined Nov 2009
544 Posts
Good idea. It's always a good idea to have a little head-room (and not rely too much on the ESC rating).
alexandermh is offline Find More Posts by alexandermh
Reply With Quote
Old Jan 29, 2013, 06:56 PM
Registered User
Waltjg's Avatar
Crystal River Fl.
Joined Jul 2008
3,681 Posts
Keenan, when dealing with the EDF's and especially anything over a 70mm, your going to have to think of high amps, hi voltage, high capacity/C rated batteries. Everything on something like this is high capacity right down to the connectors you use. I noticed you had an XT60 on the 100 amp esc,, not big enough, go to 4mm bullet connectors, you'll find that that is what the larger batteries come with. Good luck, w
Waltjg is offline Find More Posts by Waltjg
Reply With Quote
Old Jan 29, 2013, 07:34 PM
ich bauen groß modell flugzeug
Keenan smith's Avatar
United Kingdom, London
Joined Dec 2010
6,834 Posts
Yup.... Those are xt60's i have ised these up to 75a and they worked fine, but being that i wont even be using that edc in the plane any more i may aswell solder on the connectors i use.
I will be ordering either a CC 120A HV ESC or a Red Brick 120A HV ESC and soldering on some 4mm bullet connectors, (being that red brick has served me well in the past (i may go for the R.B. Esc ) and a larger capacity lipo e.g. Nano tech 5000mah.


Im considering skipping the 5s operations and going straight for 6s (my motto is more power for a reason!)

k
Keenan smith is offline Find More Posts by Keenan smith
Reply With Quote
Old Jan 29, 2013, 11:17 PM
Registered User
LuvEvolution7's Avatar
St.Catharines, Ontario
Joined Jan 2009
10,377 Posts
subbed.
LuvEvolution7 is offline Find More Posts by LuvEvolution7
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Jetset44's Super Bandit EDF Mac8 Foamy EDFs 2006 Oct 07, 2014 10:00 AM
Wanted EJF Sport Jet 90mm CARL SCHIMNOWSKI Aircraft - Electric - Jets (FS/W) 0 Jan 15, 2013 12:23 AM
For Sale 101mm edf can also be used for 90mm jets 30shiped sherlockshah Aircraft - Electric - Jets (FS/W) 0 Jan 12, 2013 01:00 AM
Discussion Min-E-Bandit 90mm Sport Jet Build Tumbler Foamy EDFs 28 Jan 29, 2007 11:33 AM
Video JetSet44's Super Bandit EDF Planted. King_Ice_Flash Electric Plane Talk 3 Sep 04, 2006 10:48 AM