HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by Chachi639, who may elect to delete unwanted replies.
Old Aug 15, 2007, 12:00 PM
Registered User
United States, CA, Davis
Joined Sep 2004
201 Posts
Link
Hand Launch Links - Updated

This handlaunch link thread was inspired by (and originated from) Adam Neat's Hand Launch Info thread. Thanks Adam for the great idea! The list has evolved due to helpful suggestions from RCGroups users: please let me know of additions, dead links, or errors.

I’m trying to keep the list short enough to be meaningful and useful. Therefore, I'm listing only only suppliers, build logs, plans, building supplies or reference materials related to handlaunch / discus-launched RC gliders. New links/recent changes are highlighted with a big red *New* or *Updated* etc. "Source code" of this post, and my reasons for archiving it, are at this link.

Thanks,
Hal

Legend: Colors denote Kit or Scratchbuild, all others are ARF

Handlaunch Planes:


Airfoils Thread ; Links to the Edge, Synergy, Zone, and Zone V2 (corrections welcome) *New*
ArmSoar ; Neos; US and Canadian Distributor of TopSky, JJEdge: Asia distributor of Steigeisen, Flow 5, and Ultegra as well
Art Hobby ; Nice selection of HLG's
Blackjack ; Blackjack DLG by RCG user graham1234. Also see the Karisma thread
BLH ; ASPI 97 (in French)
Bowman's Hobbies; Javelin *New*
Bug Yahoo Group; Bug
Canterbury Sailplanes ; Eagle
Charles River RC; Online plans for the SuperGee II, Apogee, Terminator HLG
Claus Thiele Modellbau ; Falke, Keibitz, Milan, Weihe, and others (in German)
CLM-Pro ; Trotter
CS Flugmodellbau ; KiSal
[Dave's Aircraft Works; Hosted by SkyKing RC Products; Dragonette, Schweizer 1-26
Davy; Scratchbuilt micro-HLG plans in DXF format *New*
Decker Planes; Spinnin Birdy (in German)
DeX SAL ; DeX 0.77m SAL
DJ Aerotech; Chrysalis traditional built up HLG - still just $49.95! Also their "Ask D&J" has lots of good info.
Dr. Chucho; Dr. Chucho SAL Glider
Dream Flight; Alula
Dyne-o-mite; Dyne-o-Mite 1M SAL Glider
Edge; RC Groups thread on the Edge Airfoil series - refer to the top post for links to designs buried deeper in the thread
Edge RC ; MiSAL
Enduro Composite Models ; Apogee Elite, Apogee Sport; Link is apparently dead as of 8/12
Falken ; RC Groups Thread on the Falken
Flightcomp ; Latigo, Neo, Zen *Updated*
f3x ; SALpeter, Aspirin, RAD2 and Stobel
Great Planes ; Fling DL
HJZ ; Predator II
HKM ; Concept Xtreme 2, 3, 4
HobbyKing ; Versus, Apollo 1550, Mini *Updated*
Hobby Club ; Long Shot, Top Sky Series
Hokusei model shop ; Chinese Mini DLGs similar to Apogee Sport
Hyperflight ; EU supplier of the Vladimir's Models incl. Blaster, Elf, Longshot, Fireworks
ICare ; Osiris, Gladiator, Absalut, Sofia
Icarus; Icarus 1.2m DLG
Isthmus Models; Zephyr traditional built-up HLG, others
Jones' Prototypes ; Vandal - Link is dead as of 1/14 *Updated*
Kennedy Composites ; Blaster 2, Blaster 3, Blaster 3 ST, Elf, Snipe
Liftworx ; Swyft - No longer taking orders as of May 2013
Little Nipper Yahoo Group; Grandfather of the Seeker / Swyft
Manta; RC Groups Thread on the Manta - built-up Drela DLG
Merlin Hobbies ; Ice Fire II reseller
MiMi
Miniplumes ; Topset II
MM Glider Tech; Merlin, Illusion: balsa HLGs in the $50 price range
Modelflight ; AUS supplier of Long Shot
Modellflug-Technik ; K-wing*Updated*
Modellbau Bichler ; EU supplier of Horejsi Joy and Longshot II, Valenta Apache, Huron and Baby Fly
Momentum Model Technologies ; Arctus, Polaris *Updated*
The MONSTR Shop; US Distributor of TopSky
Mountain Models/Laser Arts; Boomer, Quickflick II kit and short kit, DL-50, Supergee II short kit (templates), Spinner XT EPP Kit
Nano
http://nqrc.com/; Quickflick Kits, plus DLG onboard electronics solutions: apparently closed
Oleg Golovidov ; Validol, Stream, Akcent-2, Stark, Taboo M
Pacific Glider Works ; Arrow 5 and Arrow Pro 5 *Updated*
PCM ; Fireworks, Flow
Peak Hobby ; Binary, Binary 900 and Ice Fire II Manufacturer
Possum Works ; Avenger 3
QSC; QSC 32 inch (80cm) SAL
RC Builder ; Lighthawk, Lightspeed, Blade, Razor
Rocky Mountain Soaring Association ; Old school javelin HLGs "Aspen Leaf" and "Soarcerer" *New*
Skip Miller Models ; Ultegra, Steigeisen, Super Freak
Sklep Modelarski Exspert ; Pulsar, Mistral, Orion
Skybench Aerotech; Lil' Bird, Sunbird
SkyHighHobby ; Micro 21"
SMT Solinske Modelltechnik ; YASAL
SoaringUSA ; Solo, Tabu, X-ray, Bat, Gladiator II, Spin, Fireworks, Steigeisen, Stobel, etc
Spritz ; Spritz Molded DLG
Stratair ; Bat, Chili F3K, Risk, Steigeisen, Ultegra, and X-Ray Micro. In German
Steelhead Products; Fry and Fry MKII ; Link is apparently dead as of 8/12
Tralla la; Tralla la 80cm DLG
Top Soaring ; Top Sky 2.0 and Mini Top Sky Manufacturer
TUD Modelltechnik ; Manufacturer of Aspirin and SALPeter
Twister
YPSI; Fenix (in Czech)
Wright Brothers RC; Gambler AG
Zaerotech ; Zip 33 -
Zone; Zone airfoil series


Building Supplies:

Aerospace Composite Products
AeroMarine Products; Resins
Aircraft Spruce; Full scale aircraft supply but has lots of stuff a hobbyist could use
AMT Composites; South African Composites Supplier
Balsa USA
Cheap Battery Packs
Clarasonic; US and China Supplier of Rohacell
Composite Structures Technology (CST)
Compufoamcore; CNC foam cutting by Laszlo Horvath
Core Cutting; CNC foam cutting by RCG user Traian
Discount Composite
Fiberglass Supply
FibreGlast
Goodwinds Kites; Tailbooms
Hilaunch; Reflective tape, hinge tape
Lonestar Balsa; Back in business as of 2/2009
National Balsa
Soller Composites
Stealth Plane Works; CNC foam cutting by Anker Berg-Sonne
Sweet Composites
Thayercraft; Glass Cloth
US Composites

Reference/How-to/Inspirational:

Everything; SensibleNick's "Everything" thread - references to lots of how-to
Airfoil Programs Thread
FAI; Contest rules
Fiberglassing without vacuum; Wax Paper / Weights method for tails
Foam Properties
How to Transport your Handlaunch; Links to examples of transport boxes
Molding / Bagging Threads
Polecat Handlaunch University
Radio Carbon Art; Videos on building and flying handlaunch
Radio Controlled Soaring Digest; Check out the Archives especially March-October 2006 which documented the build process for Maple Leaf's Encore
Reese Productions; Lift Ticket videos
SAL Glider Yahoo Group; Good historical info but activity there all but ended in 2007
SuperGee Thread; Go here to get a full education on building and flying foam-core composite DLGs, centered around Mark Drela's seminal design, the SuperGee.
Switchjacks; SwitchJack and Wiring Harness Links
Tailwind Gliders; Calc tools and instructional vids
Vacuum Bagging and Molding; Phil Barnes Techniques
Chachi639 is offline Find More Posts by Chachi639
RCG Plus Member
Last edited by Chachi639; Jun 19, 2014 at 04:35 PM. Reason: Updated links
Reply With Quote
Sign up now
to remove ads between posts
Old Dec 26, 2012, 11:37 PM
Standing Athwart History
roo_ster's Avatar
United States, TX, Dallas
Joined Mar 2011
606 Posts
Howdy:

Do y'all DLG folk have unique criteria for an "ARF?"

I have snooped at most of the links that claim to be ARFs and they look awfully kit-like. Granted some foamy ARFs are nearly ready to fly out of the box, what with pre-installed electronics. Most ARFs (of all types) seem to require gluing together the major components, fiddling with the control rods, and all electronics are DIY.

I think that glassing wings, covering pods, and a few other steps are not what the usual consumer thinks of when they think "ARF."

FTR, my perspective is that of someone who is contemplating jumping into DLGs. My preference is a durable (advanced state of completion) relatively cheap beginner's ARF that I can learn how to properly launch as well as learn a thing or three about DLG construction (so that when I spend real $$$ on a kit or kit-like ARF DLG I don't hose it up).

The closest DLGs I have seen to what I consider in the ARF state of completion are the Hokusei mini DLGs and the Apache & Huron from soaringusa.com (bad reviews for the latter two, sadly).

If I have overlooked other beginner/reasonable ARFs in a state of completion similar to that of the Apache & Hokusei DLGs, I would be more than happy to recant and learn the error of my ways.
roo_ster is offline Find More Posts by roo_ster
Reply With Quote
Old Dec 27, 2012, 10:22 AM
Registered User
LI, New York, USA
Joined Mar 2003
24,040 Posts
Relatively inexpensive is not a well defined term. With top competition DLGs approaching $1000, $500 is relatively inexpensive. Is this what you had in mind?


Hobby Club has the Top Sky line. They should meet your expectations and range from $130 to $365.
http://www.hobbyclub.com/index.php?cPath=21_163


Kennedy Composites Blaster 2 is $400 and the Blaster III is $470
http://www.kennedycomposites.com/
aeajr is offline Find More Posts by aeajr
Reply With Quote
Old Jan 16, 2013, 03:01 PM
Registered User
United States, CA, Davis
Joined Sep 2004
201 Posts
Quote:
Originally Posted by roo_ster View Post
Howdy:

Do y'all DLG folk have unique criteria for an "ARF?"

I have snooped at most of the links that claim to be ARFs and they look awfully kit-like. Granted some foamy ARFs are nearly ready to fly out of the box, what with pre-installed electronics. Most ARFs (of all types) seem to require gluing together the major components, fiddling with the control rods, and all electronics are DIY.

I think that glassing wings, covering pods, and a few other steps are not what the usual consumer thinks of when they think "ARF."
I don't know how much consensus there is on these definitions, but in sorting out this list I used the following rough definitions, presented in order of increasing effort on the part of the modeler:

RTF (ready to fly) - When the modeler opens the box, all that has to be done is charge batteries and ensure that the radio is programmed properly before the plane is ready to fly. The new terminology for this with the advent of 2.4 systems is "bind 'n' fly". (I don't think any DLG's come this way except if you buy someone else's already completed plane.)

ARF - With the exception of sometimes having to cut out control surfaces, all the major parts of the plane are provided complete, ready to assemble. Wing halves may need to be joined, tail surfaces mounted, and control horns installed. The modeler must still install the radio, ensure that control surfaces move the correct direction, and ensure that the plane is balanced properly.

Kit - In addition to the work done on an ARF, the modeler must also create the major airplane parts (wing, fuse, tail) out of smaller pieces of wood, foam, carbon/glass by framing up, vac bagging, or other techniques. The kit provides a complete set of the needed materials and some of the parts (wing cores or ribs, fuse materials or molded parts, tail pieces) have been cut out. If the modeler has to provide sheet or stick stock, glass or the like, it's called a short kit.

Scratchbuild - I categorized links as scratchbuild if the link shows a builder who sourced all the materials themselves, either cutting out and fabricating every single thing, or by buying some of the parts and building others, for example buying foam cores but showing the bagging process.

If there are some links that don't match that definition, please let me know and I'll try to fix them.

Thanks,

Hal
Chachi639 is offline Find More Posts by Chachi639
RCG Plus Member
Last edited by Chachi639; Aug 09, 2013 at 05:01 PM.
Reply With Quote
Old Jul 02, 2013, 04:36 PM
Registered User
United States, CA, Davis
Joined Sep 2004
201 Posts
List Maintenance

I continue to receive excellent pointers to links to add, and with this help the list continues to grow! This list has continued to evolve largely due to the collaboration of so many RC Groups members. Thanks everyone for your help.

I've been maintaining the top post with all the current information. Followup posts, after the link suggestions have been added to the list, I've been pruning out of the thread after letting them stand for a few weeks or if a flurry of comments starts to stack up. I hope that no one takes offense at that, I'm just trying to keep things quick n' clean.

An additional note: after a few days, I'm also going to be pruning out posts containing reviews, criticisms, complaints, or praise of various vendors. I'm trying to keep this thread about listing HLG and DLG models. Instead please take those discussions over to Vendor Talk.

Suggestions for new links are always welcome. Furthermore, notification about bad or obsolete links is very welcome - I no longer check them on any regular basis.

Regards,
Hal
Chachi639 is offline Find More Posts by Chachi639
RCG Plus Member
Last edited by Chachi639; Jul 02, 2013 at 04:45 PM.
Reply With Quote
Old Aug 01, 2013, 11:18 PM
It's GoTime all the Time
gotime360's Avatar
United States, CA, Portola
Joined Nov 2011
181 Posts
Add flight comp / NEO DLG http://flightcomp.com/product-category/dlgf3k/
gotime360 is offline Find More Posts by gotime360
Reply With Quote
Old Aug 06, 2013, 03:58 PM
Chuck 'Em and Chase 'Em
Fly2High's Avatar
United States, NY, Plainview
Joined Aug 2005
8,054 Posts
HKM ; Concept Xtreme 2, 3


HKM now has the CX4
Fly2High is offline Find More Posts by Fly2High
Reply With Quote
Old Aug 09, 2013, 02:16 PM
k2x
Ulrich Freitag
k2x's Avatar
Germany
Joined Aug 2004
30 Posts
YASAL - 1st, 3rd and 4th Flyoff Juniors WC 2013

Solinske Modelltechnik - maker of the YASAL

SMT Solinske Modelltechnik

Kind regards
Ulrich
k2x is offline Find More Posts by k2x
Reply With Quote
Old Aug 09, 2013, 04:30 PM
Registered User
United States, CA, Davis
Joined Sep 2004
201 Posts
Quote:
Originally Posted by gotime360 View Post
Added! Thanks
Quote:
Originally Posted by Fly2High View Post
HKM ; Concept Xtreme 2, 3


HKM now has the CX4
Edited to add. Thanks.
Quote:
Originally Posted by k2x View Post
Solinske Modelltechnik - maker of the YASAL

SMT Solinske Modelltechnik

Kind regards
Ulrich
Added! Thanks.
Chachi639 is offline Find More Posts by Chachi639
RCG Plus Member
Latest blog entry: DLG Airfoil Links
Reply With Quote
Old Aug 24, 2013, 07:30 AM
Look out below
mcnowhere's Avatar
United States, OR, McMinnville
Joined Aug 2011
1,169 Posts
http://www.liftworx.com/news/
May, 2013
It's been a while now that Liftworx has suspended any new sales, though we are still trying to help customers with spare parts, instructions for purchased kits, and information or advice whenever possible. Important life changes have meant that we simply don't have the resources to run Liftworx to our own high standards.
mcnowhere is online now Find More Posts by mcnowhere
Reply With Quote
Old Jan 23, 2014, 09:50 AM
Registered User
United States, CO, Fort Collins
Joined Feb 2013
22 Posts
I went on a plan hunt today and stumbled on some HLG models not listed above.

The Davy
http://www.geocities.com/rc_eflyer/davy.html

The Aspen Leaf and Soarcerer
http://www.rmsadenver.com/article.html

The Javelin
http://www.bowmanshobbies.com/javelin.html

Perhaps older models, but they still exist.
whizbo is offline Find More Posts by whizbo
Reply With Quote
Old Jan 29, 2014, 02:47 PM
Chuck 'Em and Chase 'Em
Fly2High's Avatar
United States, NY, Plainview
Joined Aug 2005
8,054 Posts
Someone should provide the Zone V2 and Synergy foils threads

Would also be helpful to have direct links to the final plane designed by GT as well.
Fly2High is offline Find More Posts by Fly2High
Reply With Quote
Old Jan 29, 2014, 10:50 PM
a.k.a. Bob Parks
Glendale, AZ
Joined Jun 2008
2,241 Posts
The Vandal link is dead
bbbp is offline Find More Posts by bbbp
Reply With Quote
Old Feb 04, 2014, 10:35 AM
Registered User
United States, CA, Davis
Joined Sep 2004
201 Posts
Quote:
Originally Posted by whizbo View Post
I went on a plan hunt today and stumbled on some HLG models not listed above.

The Davy
The Aspen Leaf and Soarcerer
The Javelin

Perhaps older models, but they still exist.
Thanks for the links! I've incorporated them into the list

Hal
Chachi639 is offline Find More Posts by Chachi639
RCG Plus Member
Latest blog entry: DLG Airfoil Links
Reply With Quote
Old Feb 04, 2014, 10:38 AM
Registered User
United States, CA, Davis
Joined Sep 2004
201 Posts
Quote:
Originally Posted by bbbp View Post
The Vandal link is dead
I've made a note in the list that the link is broken.

Anyone have any information about whether this design is still available elsewhere?
Chachi639 is offline Find More Posts by Chachi639
RCG Plus Member
Latest blog entry: DLG Airfoil Links
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Where to hold LS on hand launch? MK Parkflyers 3 Jun 30, 2001 06:22 AM
***Park Flyer Towing Micro Hand Launch Glider!*** Chris Rust Parkflyers 13 Jun 19, 2001 10:04 PM
Bungee assisted hand launch resources - videos? Sal C Electric Plane Talk 8 May 04, 2001 03:39 PM
Hand Launch ToddO Beginner Training Area (Aircraft-Electric) 6 May 01, 2001 06:37 AM