Why not.. here it is.. all things for the new UMX beast!
http://www.horizonhobby.com/Products...rodID=EFLU4080

New info from official release:
BNF- $169.99 ()

Videos:

Horizonhobby.com Preview Ultra Micro Extreme Beast from E-flite (9 min 59 sec)

eFlite Micro Beast Airplane (1 min 34 sec)

Horizonhobby.com - E-flite Ultra Micro X Beast first peek! (1 min 6 sec)

Also new link for the AR6400LBL:
http://www.horizonhobby.com/Products...D=SPMAR6400LBL



~Kev

Specs list for EFLU4080
Wingspan 14.7 in (374mm)
Overall Length 15.7 in (400mm)
Wing Area 83.8 sq in (5.41 sq dm)
Flying Weight 2.36 oz (67g)
Motor Size 180BL Brushless Outrunner, 2300Kv (included)
Radio AR6400LBL 6CH Brushless ESC Receiver (included)
Trim Scheme Colors Black, Red, Gold
CG (center of gravity) 18mm from Leading Edge of Bottom Wing
Prop Size 5 x 2.75 in (127mm x 70mm)
Recommended Battery 2S 7.4V 120mAh Li-Po (included)
Aileron Yes
Elevator Yes
Rudder Yes
Throttle Yes
Flaps No
Retracts No
Approx. Flying Duration 5 minutes
Scale Ultra Micro
Charger Celectra 2S 7.4V DC Li-Po Charger (included)
Steering Yes
Experience Level Intermediate
Recommended Environment Indoor/Outdoor
Is Assembly Required No

Link with specs & pics:

http://www.modelflight.com.au/produc...NF-6419-6.html

Official Horizon Hobbies Employee posts:
RE: the electronics & flaperons.
Re: the landing gear, Y harness and aileron servo location.
More lg & servo location info

Its funny how parkzone or eflite just adds a letter to their new products to make it sould better. Like sukhoi XP. Or the new beast um"X". I starting to scrape up some money for this brushless micro! Hope it comes out before Christmas!

325mah 45C 2s Thunderpower pack at Atlanta Hobby!
http://www.atlantahobby.com/Store/pc...-638p13943.htm

$16.99 is likely cheaper then Eflite's stock 2s 120mah pack, and guarenteed to last longer.. This battery will be a HOT ticket when this bird comes out!

~Kev

Yay! No more brushed motors failing! Wonder if you can use the same BL setup on the sukhoi xp or the mustang.

Doubt it, seems to be heavy... only time will tell though when we can get our hands on it and actually weigh the setup outside of the plane..

~Kev

Yeah, 2.6oz is a bit heavy.

Park Zone??? People who never read, just want to be the first hahahaha

I like the AR6400LBL idea, finally no need for dorking around with an external brushless ESC. I also hope this combination works well.

Originally Posted by ChuckTseeker

Park Zone??? People who never read, just want to be the first hahahaha

Little slow on the uptake, aren't they?

Umm yeh.. now that the unnecessary public slamming is over with, lets get back on the topic eh?

After looking at the pictures, it dawned on me.. With 2 aileron servos flaperons or spoilerons could easily be programmed in via a dx6i or Dx7.. even slower flight would be possible then..


Kinda scary seeing them under the wing however, on top of the bottom wing would have been far safer!

~Kev

sorry couldn't help myself

great looking Micro, will this plane do all the 3D stuff like it's big brother?

who will be the first to fit this BL system into a previous UM

cheers chuck

Motor placement and construction looks solid.

Looks very serviceable and workable too.
That's nice to see in these smaller models.

Yes, should be interesting to see for sure!



looks like a flat wing almost in that pic, the rest of the preview pics aren't the best for telling what wing they used, but it looks think & flat to me! I sure hope it isn't 4site thin, I'd cry if they make this bird THAT fragile & brushless.

~Kev