Espritmodel.com Telemetry Radio
Reply
Thread Tools
Old Jul 19, 2012, 04:21 AM
Suspended Account
Joined Dec 2010
11,764 Posts
bs_nfet
timecop is offline Find More Posts by timecop
Reply With Quote  (Disabled)
Sign up now
to remove ads between posts
Old Jul 19, 2012, 04:56 AM
Registered User
Slovenia, Ljubljana
Joined Sep 2011
1,455 Posts
Thx.

What is difference with bs_nfet and bs_nfet reverse?
er9xuser is offline Find More Posts by er9xuser
Reply With Quote
Old Jul 19, 2012, 04:57 AM
MavLab coordinator
Joined Nov 2006
37 Posts
Quote:
Originally Posted by simonk View Post
D'oh. I had actually emailed them about this before I placed an order, but did not get a reply. I will try again. It's probably time to work on the silabs code sooner than later. I also ordered a few small ones from HobbyKing and will see if any of those are still AVRs.
Hi ,
I was wondering if the silabs code was developed for the hobbyking TURNIGY Plush 6A ESC http://www.hobbyking.com/hobbyking/s...ontroller.html
bartremes is offline Find More Posts by bartremes
Reply With Quote
Old Jul 19, 2012, 05:18 AM
Suspended Account
Joined Dec 2010
11,764 Posts
Quote:
Originally Posted by er9xuser View Post
Thx.

What is difference with bs_nfet and bs_nfet reverse?
take a guess; hint : motor spins another way.
timecop is offline Find More Posts by timecop
Reply With Quote  (Disabled)
Old Jul 19, 2012, 05:21 AM
Registered User
Slovenia, Ljubljana
Joined Sep 2011
1,455 Posts
Sorry for my noob question. In teh meen time i have figured out
er9xuser is offline Find More Posts by er9xuser
Last edited by er9xuser; Jul 19, 2012 at 05:21 AM. Reason: edit
Reply With Quote
Old Jul 19, 2012, 06:56 AM
Fly, crash, rebuild.
United States, NY, Shelter Island
Joined May 2011
877 Posts
I flashed 6 F30a escs last night as a noob.
Built the connector out of 6x1 header pins bent to fit the pads with 2 servo extension leads attached on a 3x2 header pin to the 6 pin usbasp ribon cable. No soldering required
Re-assigned the servo leads by taking them out of their plastic holders to the corresponding pin alignments.
Thank you to TC lazyzero and SimonK.
H
shelterock is offline Find More Posts by shelterock
Reply With Quote
Old Jul 19, 2012, 08:04 AM
making crashing a lifestyle!
dutchcommando's Avatar
The Netherlands, UT, Soest
Joined Feb 2012
1,039 Posts
Quote:
Originally Posted by timecop
Why buy redcrap when F60A is in stock, and is flashable?
http://www.hobbyking.com/hobbyking/s...dProduct=16892
oops.
60A isn't in stock, and I guess redbrick works up to 7S, thats pretty good.
The worst that will happen is you get one with atmega locked up, so you'll have to hot air it off and replace with a new one.
cool thanks!
dutchcommando is offline Find More Posts by dutchcommando
Reply With Quote
Old Jul 19, 2012, 08:21 AM
James not bond
jy0933's Avatar
United States, MN, Minneapolis
Joined May 2012
2,074 Posts
this is the dynam detrum 40A I got in hand.

it look "exactly" the same as turnigy 40A

i notice it is said outdated.. does that mean it's no longer flashable or?


thanks
jy0933 is offline Find More Posts by jy0933
Last edited by jy0933; Jul 19, 2012 at 08:31 AM.
Reply With Quote
Old Jul 19, 2012, 12:31 PM
Team WarpSquad
Japan, Tokyo
Joined Jun 2011
2,786 Posts
Quote:
Originally Posted by shelterock View Post
I flashed 6 F30a escs last night as a noob.
Built the connector out of 6x1 header pins bent to fit the pads with 2 servo extension leads attached on a 3x2 header pin to the 6 pin usbasp ribon cable. No soldering required
Re-assigned the servo leads by taking them out of their plastic holders to the corresponding pin alignments.
Thank you to TC lazyzero and SimonK.
H
Pretty much the same as what I did. For flashing HK 10A (blue shrinkwrap) It might be a little harder to get the very narrow pitch but I'm sure you can find a way if you need.
But this is fine for HK F30A/F20A.
thwaitm is offline Find More Posts by thwaitm
Reply With Quote
Old Jul 19, 2012, 02:58 PM
My RC builds in my profile.
daign's Avatar
United States, CA, Los Angeles
Joined Feb 2011
2,559 Posts
Can anyone confirm or deny that these "ipeaka iQ series" specifically the 10a from altitude hobbies are running Simonk Firmware?

http://www.altitudehobbies.com/ipeak...er_name=ipeaka


If so are they donating to Simon?
daign is offline Find More Posts by daign
Reply With Quote
Old Jul 19, 2012, 03:43 PM
home of the best antennas
United States, FL, Boca Raton
Joined Nov 2011
865 Posts
Hello guys, I flashed my rctimer escs 20A with the tgy.hex file , all 4 of them went well.
Now I am running a new board on the copter but I don't know if my problem is due to the firmware or the new crius AIO board.

Is the tgy.hex firmware the right one for these escs?

I am getting a crazy throttle that works in bursts...

look at the video I took... quite crazy really.

MVI 5227 (1 min 20 sec)
KondorFPV is offline Find More Posts by KondorFPV
Reply With Quote
Old Jul 19, 2012, 03:46 PM
Registered User
Crashed22's Avatar
United States, ID, Boise
Joined Mar 2012
162 Posts
@daign-- I can confirm they are NOT simonk flashed. Thye are re-branded rctimers. Dont use them. If you read the warning in the repository, they have mcu problems when flashed. I know, I tried, they did not work. I went with the 10a HK's which work great.
Crashed22 is offline Find More Posts by Crashed22
Last edited by Crashed22; Jul 19, 2012 at 03:52 PM.
Reply With Quote
Old Jul 19, 2012, 06:44 PM
Suspended Account
Joined Dec 2010
11,764 Posts
Quote:
Originally Posted by daign View Post
Can anyone confirm or deny that these "ipeaka iQ series" specifically the 10a from altitude hobbies are running Simonk Firmware?

http://www.altitudehobbies.com/ipeak...er_name=ipeaka


If so are they donating to Simon?
They're not. Just same ol' hobbywing-esque crap.

However, these are simonk:
http://www.hobby-lobby.com/erc_rapid...39742_prd1.htm
Though without bootloader.
timecop is offline Find More Posts by timecop
Reply With Quote  (Disabled)
Old Jul 19, 2012, 06:47 PM
Registered Aircraft Offender
Truglodite's Avatar
Carmichael, CA
Joined Feb 2007
3,511 Posts
HK SS30A-HW... still programmable

Not that anyone should care about an esc with Pfets , but I just received my 4 HK SS30A-HW esc's in the mail today... luckily all 4 are programmable. There were some folks with HK SS20A-HW that shipped with RSTDSBL set (making them unflashable). There was some speculation that other HK SS-HW esc's would be affected by this. So just to verify, here are the ones I bought:

http://www.hobbyking.com/hobbyking/s...5_30A_ESC.html

These are still "simonK compatible". Thanks Simon!

Kev

[edit: Thanks for the link TC... had no idea HL sells 'em. The price is fair too.

FYI, I tried flashing the tgy.hex from the "github" link on the OP, and the esc's became unresponsive. I reflashed with the latest tgy.hex file from the KKFlashtool online repository (found in "tmp" folder after downloading the repository), and all is well. Note that with nothing but my USBasp connected to the esc (power from USB), flashing works fine. Installed in my quad, with motors and all, this no longer worked. To get it to flash installed like that, I had to remove the USB power jumper from my programmer, and power the esc's with a lipo. I'm guessing the motors and/or other esc's in the circuit add to the load and the programmer can no longer handle the current? Anyhow... the buggers fly awesome now!]
Truglodite is offline Find More Posts by Truglodite
Last edited by Truglodite; Jul 20, 2012 at 06:10 PM.
Reply With Quote
Old Jul 19, 2012, 07:45 PM
James not bond
jy0933's Avatar
United States, MN, Minneapolis
Joined May 2012
2,074 Posts
Dynam Detrum 40A flashable

Update on Dynam Detrum 40A

chip layout is same as T40A

hex file used tp_nfet.hex I flashed it with kktool set bootloader[attached]

usblink update is yet to be confirmed... pin identification will be update later with pin id




Code:
Flash the firmware file.

E:\Google Drive\proj-quad\Esc\ft1\lib\avrdude\windows\avrdude.exe -C E:\Google Drive\proj-quad\Esc\ft1\lib\avrdude\windows\avrdude.conf -p m8 -P usb -c usbasp -B 8 -e -U lfuse:r:E:\Google Drive\proj-quad\Esc\ft1\tmp\/lfuse.hex:r -U hfuse:r:E:\Google Drive\proj-quad\Esc\ft1\tmp\/hfuse.hex:r 

avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% -0.00s

avrdude.exe: Device signature = 0x1e9307
avrdude.exe: erasing chip
avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: reading lfuse memory:

Reading | ################################################## | 100% 0.00s

avrdude.exe: writing output file "E:\Google Drive\proj-quad\Esc\ft1\tmp\/lfuse.hex"
avrdude.exe: reading hfuse memory:

Reading | ################################################## | 100% 0.00s

avrdude.exe: writing output file "E:\Google Drive\proj-quad\Esc\ft1\tmp\/hfuse.hex"

avrdude.exe done.  Thank you.


E:\Google Drive\proj-quad\Esc\ft1\lib\avrdude\windows\avrdude.exe -C E:\Google Drive\proj-quad\Esc\ft1\lib\avrdude\windows\avrdude.conf -p m8 -P usb -c usbasp -B 8 -e -U lfuse:w:164:m -U hfuse:w:218:m 

avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% -0.00s

avrdude.exe: Device signature = 0x1e9307
avrdude.exe: erasing chip
avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: reading input file "164"
avrdude.exe: writing lfuse (1 bytes):

Writing | ################################################## | 100% -0.00s

avrdude.exe: 1 bytes of lfuse written
avrdude.exe: verifying lfuse memory against 164:
avrdude.exe: load data lfuse data from input file 164:
avrdude.exe: input file 164 contains 1 bytes
avrdude.exe: reading on-chip lfuse data:

Reading | ################################################## | 100% -0.00s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of lfuse verified
avrdude.exe: reading input file "218"
avrdude.exe: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.02s

avrdude.exe: 1 bytes of hfuse written
avrdude.exe: verifying hfuse memory against 218:
avrdude.exe: load data hfuse data from input file 218:
avrdude.exe: input file 218 contains 1 bytes
avrdude.exe: reading on-chip hfuse data:

Reading | ################################################## | 100% -0.00s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of hfuse verified

avrdude.exe done.  Thank you.

Flashing firmware from file.: E:\Google Drive\proj-quad\Esc\fw\tp_nfet.hex

E:\Google Drive\proj-quad\Esc\ft1\lib\avrdude\windows\avrdude.exe -C E:\Google Drive\proj-quad\Esc\ft1\lib\avrdude\windows\avrdude.conf -p m8 -P usb -c usbasp -B 8 -e -U flash:w:E:\Google Drive\proj-quad\Esc\fw\tp_nfet.hex:i 

avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% -0.00s

avrdude.exe: Device signature = 0x1e9307
avrdude.exe: erasing chip
avrdude.exe: set SCK frequency to 93750 Hz
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: reading input file "E:\Google Drive\proj-quad\Esc\fw\tp_nfet.hex"
avrdude.exe: writing flash (8192 bytes):

Writing | ################################################## | 100% 2.03s

avrdude.exe: 8192 bytes of flash written
avrdude.exe: verifying flash memory against E:\Google Drive\proj-quad\Esc\fw\tp_nfet.hex:
avrdude.exe: load data flash data from input file E:\Google Drive\proj-quad\Esc\fw\tp_nfet.hex:
avrdude.exe: input file E:\Google Drive\proj-quad\Esc\fw\tp_nfet.hex contains 8192 bytes
avrdude.exe: reading on-chip flash data:

Reading | ################################################## | 100% 1.47s

avrdude.exe: verifying ...
avrdude.exe: 8192 bytes of flash verified

avrdude.exe done.  Thank you.
jy0933 is offline Find More Posts by jy0933
Last edited by jy0933; Jul 19, 2012 at 09:39 PM.
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Rctimer 30A esc cutting out with KK board Efliernz Multirotor Talk 2 May 26, 2011 02:20 PM
Sold FS: Tricopter Parts- HK401b, Pentium 30A ESC, rctimer 750kv motors pwu_1 Aircraft - General - Miscellaneous (FS/W) 2 Jan 18, 2011 09:58 PM
Sold RCTimer 2826-6 + ESC 30A New in packaging will trade as well Pics Added! planebldr Aircraft - Electric - Power Systems (FS/W) 4 May 25, 2010 09:54 PM
Discussion RCTimer 30A Programmable ESC hunter7193 Power Systems 8 Jan 02, 2010 02:27 PM
For Sale Several New ESC's - 10a, 20a, 30a - Reduced Callen9345 Aircraft - Electric - Power Systems (FS/W) 0 Apr 20, 2009 02:31 PM