|Apr 11, 2013, 12:08 AM|
an oops tuned into a model
so tonight i was working on a new skill for a micro SAL rc glider, vacuum bagged foam core tails, but i had a little accident or rather hindsight; i glassed it with the fiber running /\ biased rather than +++ so it was stiff in the twisting rather than span wise. so rather than scrap the nice airfoiled tail piece, i made a small cut through the top skin and sanded a little and viola, its now a 120mm wing!
its a piece of eps foam thats been glassed with i believe 0.5oz/yd, final weight of the wing was 0.538 grams, so not that bad really. after i glassed the wing to the fuse stick (yes its never coming off) and made tails etc. it ended right at 0.9 grams all up. for an outdoor mini glider, i would say its a success, as a dlg tail, totally unusable lol
|Apr 12, 2013, 12:43 PM|
If i were to start out with the intention of making one, i would make the wing thinner than this one. Its a bit too thick for my liking, but it still flies good.
One nice thing is that the epoxy doesnt get super hard and brittle so you can still trim the wings and it will hold its shape.
Yesterday i got it trimmed so that a throw facing the wind going from right to left would give a good climb and then a stall dropping the right wing turning into the wind and circling in a right pattern.
Really how much intrest is there in a small model like this if it were a small quick kit?
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||How to Convert a Blade 450 3D into an FBL system||Preston019||Electric Heli Talk||20||Nov 03, 2014 11:21 PM|
|Discussion||Making an old FP POS into someting useable||mjsas||Micro Helis||0||Jan 26, 2013 03:41 PM|
|Discussion||Oops, T-Rex fell out of the sky and into a LAKE! Video of Crash!||jarod120||FPV Talk||623||Apr 24, 2012 06:07 PM|
|Discussion||Mod a Phantom into Trex into an HBK||sparx||Micro Helis||18||Sep 27, 2007 03:26 PM|