|May 07, 2011, 10:06 PM|
Baudis Trinity F3F Carbon D Box
THIS IS A RELIST. REDUCED PRICE $750
Im selling my Baudis Trinity F3F Carbon D Box...just dont fly it as much as i used to and i have other hobbies taking up my money right now. here are the details.
Airtronics 94761Z's all the way around
Very minimal (if any at all) slop in any control surface
White over blue stripes with custom added paint.
new 6v NIMH battery pack
rx/tx ready (but not included)
wing servo covers.
new v tail carbon pushrods
I also have the original padded wing, tail, and fuse bags that came with the plane.
please note that this plane is structurally sound and has never been involved in a crash, however, it does have some minor damage and blemishes that i will now list.
-previous owner repaired a stress crack on the fuse right behind the wing with a kevlar sock repair. while repainting the fuse i verified this repair and it was done well. see link below from previous owner.
-unknowingly, the previous owner sold me the plane with delamination/disbond in the v-tail right at the saddle. i injected this delam/disbond and strengthened it with a 2 ply graphite patch. this patch looks relatively professional and i guarantee that it is more than strong enough...i am a certified composite repair engineer, but no expert none the less.
-the outbd edges of the flaps and the inbd edges of the ailerons have some small damages in the gel coat but nothing major.
-RH OWP is near spotless minus some small abbrassions. LH OWP has 3 small, eraser size, repaired leading edge dings.
-plane has a slightly glitchy LH OWP servo. at first i fixed this problem with a new servo wire but lately it came back. maybe this is just a radio issue but either way i adjusted the price to reflect this. it hasnt caused me any issues but i just want to be real honest.
-IWP has a couple dents/scratches on the lower surface but has no punctures or anything like that.
overall this plane is in great shape but i want you to know any small imperfections it has. i painted this plane (lightly, just the colored parts, white is original gel coat) with Duplicolor engine enamel which is pretty tough stuff and fairly shiny. paint looks relatively professional and im no noob to the use of a rattle can. paint is actually very bright green and bright blue but doesnt appear so in the photos below. im asking $750 OBO. located locally in San Diego California. I dont race so i cant meet you at a race. if you want to set up a test flight at Blossom Valley let me know and plan to have cash in hand. id rather not ship but would consider it. buyer will pay actual shipping which from past experience would be somewhere around $60.
please let me know if you have any questions at all
Last edited by Eric Zanutto; May 09, 2011 at 01:29 AM.
|Jun 11, 2011, 08:02 PM|
I think people might be scared of the 2 small repairs but they really arent anything major at all. maybe the fact that i added some paint to it that may not catch some peoples eye is a bad thing too. i just couldnt see the all white well enough. either way, I feel i have adjusted the price accordingly. times are just tough right now i guess.
this is the paint scheme i copied.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sold Baudis Trinity F3F Carbon D Box||Eric Zanutto||Aircraft - Sailplanes (FS/W)||4||Apr 30, 2011 06:47 PM|
|Sold Baudis Trinity Carbon D-Box F3F RTF NEW PICS||Marcelz||Aircraft - Sailplanes (FS/W)||6||Dec 31, 2009 12:29 AM|
|For Sale Helping A Friend: Two Trinity F3F (Full Carbon and Carbon D-Box)||seto||Aircraft - Sailplanes (FS/W)||1||Oct 07, 2009 02:34 PM|
|Discussion Trinity F3F Carbon D-box or full carbon||oyazi||Slope||4||Aug 24, 2006 12:49 PM|
|Discussion Trinity F3F Carbon or Carbon D-Box??||P-51flyer||Slope||10||Jul 23, 2006 03:51 AM|