HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old May 30, 2013, 09:13 PM
Registered User
United States, VA, Monroe
Joined Jan 2013
11 Posts
Discussion
er9x flashing promblems HELP!

I have been flashing tx's with er9x how awhile and am all the sudden having problems. This is what eepe is telling me. This is about to drive me up the wall. I have 2 transmitters I need to flash please help.




================================================== ===============================
Started AVRDUDE
C:/Program Files/eePe/avrdude.exe -c usbasp -p m64 -P usb -U eeprom:r:C:/Users/Wilson/AppData/Local/Temp/eebackup.hex:i
================================================== ===============================

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: error: programm enable: target doesn't answer. 1
avrdude.exe: initialization failed, rc=-1
Double check connections and try again, or use -F to override
this check.


avrdude.exe done. Thank you.


================================================== ===============================
AVRDUDE done - exit code 1
================================================== ===============================
charliewilson is offline Find More Posts by charliewilson
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Alert Turnigy with ER9x flash - how to set failsafe....? VizBizTas Radios 4 Jun 17, 2014 06:24 PM
Discussion How to flash ER9X on your turnigy 9x. Wrice4 Radios 2 May 27, 2013 11:08 AM
turnigy 9x flashed with er9x,,, extras!!! EJ1208 Aircraft - General - Radio Equipment (FS/W) 3 Jan 11, 2013 06:57 PM
Help! Turnigy 9x er9x flashing itsmillertime Radios 3 May 10, 2012 07:44 PM
Discussion er9x flashing problem fpvguy Radios 17 Jan 23, 2012 11:14 AM