|Dec 23, 2012, 12:27 PM|
15S is actually too much power for F3P.
That is what is in mine , and it is very easy to fly too fast.
Mine is a V1 and weighs 114 grams w/o the battery. Is the V2 that much lighter?
Less paint? (Mine has gained ~4 grams over the years)
But if you want more 3D/ vertical performance then more power might be in order.
The idea behind the 9L would be to run a bigger prop to get better down line braking.
Scott Barnhart and (I think) Jamie Hicks were running them on their Excel V2, which have no drag brakes.
|Dec 24, 2012, 10:48 AM|
Thanks for the replies Tim & others.
With that said, I guess I will stay with the 9L. The prop that came with the v2 is a 8x4.3 gws. Sounds like I should go larger with a 9" GWS. 9x ??? pitch?
Keep in mind I am still a somewhat of a rookie in my mind & this is my first depron plane. I've been flying 3d foamies for a couple years & still working on my landings with my foam cessna 182 & flyzone switch before I attempt my 3d balsa planes.
Next question, what light weight receiver is suggested? I use a Futaba 7c radio.
Happy Holidays to all !!!
|Dec 24, 2012, 01:03 PM|
The standard prop for the 9l is the 8x4.3. Searching I cannot find any data for it with a 9" prop. I would be careful and use a watt meter to do some testing first. I would hate to see you blow your motor.
It will fly fine with the 8" prop. The reason for going to a larger prop is for motor braking. Using the drag plates that come with the osiris you already have lots of drag.
If you try it, let us know how it works.
|Dec 24, 2012, 03:37 PM|
That's why went with the 1500kv, motor swinging a 9x4.3.. I removed the stock airbrakes and made custom smaller ones..
I flew the wings off it at indoor flying Sunday/food drive, In Babylon New York. Great group of guys, That enjoy some good flying..
Most of the guys were shocked at how well my custom Osora's flys! it's about a half inch shorter, and a Almost 2 inches narrower than a stock one.. It's a proper freestyle plane now..
Thanks to the Babylon fliers for Welcoming other clubs!
|Apr 12, 2013, 08:12 PM|
Very nice. And great skills.
Do you use any type of rear spar or something where typically a rear wheel would be? I will be flying mine outside and concerned about tearing up the rear bottom....
|Apr 12, 2013, 11:11 PM|
tie-wrap tail skid
Here is a photo of the tie-wrap skid on a prototype plane. You can just make it out in the photo, but shows how I do it.
I hope this helps,
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||SPEED LIST - Speed, Plane, Pilot, Location, Date, Witness, Gyro?(Yes/No)||daboz||Dynamic Soaring||2565||Today 02:48 PM|
|Discussion||Twisted Hobbys - 32" Xtra Slick - Build, Fly, Vid||hercdriver7777||3D Foamies||3018||Jul 03, 2014 01:53 PM|
|New Product||Osiris V2||eli5539||Indoor Pattern/F3P||1||Dec 14, 2010 08:08 PM|
|Help!||thread Not used any more||yiny0730||FPV Talk||4||Oct 15, 2010 09:46 AM|