|Aug 29, 2011, 06:28 PM|
Klass Kote questions
I'm painting my Great Planes Master Caddy field box with Klass Kote. The field box manual says to do the following:
1. use wood filler
2. apply polyester resin, coating epoxy, or polyurethane
(I bought oil-modified polyurethane at home depot)
3. apply primer
4. apply paint
Will Klass Kote primer stick well to oil-modified polyurethane?
What product do you use before you put on the primer?
I'll do a test painting on a piece of scrap plywood. How do I test if the finish is durable? By scraping it with something?
Another question: I'm planning on painting with a brush, not airbrush. Should I still wear a respirator? When I opened the shipping box, the toxic vapors from the closed cans were really strong.
|Sep 29, 2011, 07:30 PM|
Joined Sep 2011
I've never used it over poly, but Klass Kote is remarkably tenacious. I'd test it, though, just to be sure, over a scuffed and non-scuffed version of your surface.
Let Klass Kote cure for 4-7 days before doing a final adhesion or surface scratch test.
It's a pretty durable surface. In terms of hardness, not as hard as auto poly, but better than rattle can alternatives.
As for a respirator, yes, you should use one, whether spraying or brushing. Klass Kote is loaded with VOCs to thin it - that's what you smelled when you opened the box. Breathing those fumes is much like breathing lacquer thinner fumes. So use a respirator rated for organic vapor. KK is not as toxic as auto poly, but it's not exactly aroma therapy either.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Klass Kote - hand brushing?||Killionaire||The Builders Workshop||1||Aug 19, 2011 09:56 AM|
|anyone use KLASS KOTE epoxy?||jeff262||Scale Kit/Scratch Built||1||Apr 04, 2005 05:07 PM|
|Klass Kote||rorywquin||Fuel Plane Talk||0||May 10, 2004 04:30 AM|