|Aug 10, 2003, 04:02 PM|
Joined Jul 2003
Potensky Cobra 3D
I was wondering about the Potensky Cobra 3D model, can it really hover with the stock set up? at 3/4 throttle?!? i planing on using:
2* 18 grams each GWS mini servos
2* 7 grams each PICO servos
SUN 1000 18A ESC (22 grams with cables)
***if ESC is incuded with the kit im using the one that is included***
7 or 8 cells twicell 720 mAh NiMh (93 grams or 105 grams)
Hitec 555 reciever (21 grams)
stock 300 motor + stock 5:1 gear box
would it have enough power per weight to hover at 3/4 throttle and perform 3D meneuvers?
|Aug 10, 2003, 05:51 PM|
I'm not sure. What is the stock prop?
Do a search and you may find all you need. Here's one to start you off with:
Who's selling the Cobra here in Israel (or any other of the Czech planes)?
|Aug 12, 2003, 07:17 PM|
Joined Jun 2003
I think you will have to use 8 cells, to be happy.
I was running the stock setup with 2 cell etec 1200 lipos, so about 7.4 volts.
Even with the lower weight of the batts, I was not too happy with the way it flew. Yes, it would hover, barely. But it was too slow.
I quickly switched to an astro 010 brushless, with their 3.3 gear box, and 3 cell etec lipos, and that is wonderful!
I think the extra cell, (8), will be much better than 7.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Potensky Cobra||Greg Covey||Foamies (Kits)||344||Nov 21, 2005 05:17 PM|
|Potensky Cobra airfoil||jared salbato||Foamies (Kits)||0||Apr 17, 2003 12:13 AM|
|Potensky Cobra - gearbox ?||Geoff_S||Indoor and Micro Models||1||Apr 06, 2003 06:41 AM|
|potensky cobra??||sbaug||Parkflyers||5||Mar 25, 2003 10:36 PM|
|potensky cobra||deeejay||Parkflyers||0||Jan 14, 2003 11:35 PM|