|Jan 24, 2003, 10:48 PM|
Making a big wing strong enough
I have cut foam cores for a large sailplane project: 12' span, 15" root chord, 9" tip chord. 4 sections, each 36" long.
I plan to use 3/8x3/8" spruce spars top and bottom for the root sections, aand 1/4x1/4" for the tip sections. I plan to use a 1/2" id aluminum tube and 1/2" carbon rod for the root joiner. Tip sections will have plywood joiners and be glassed together.
Here's the [art I'm struggling with: Should I cover it? I've used 3/4oz glass on a 7 foot wing with good success; no L.E. carving, etc. I may go to 1.4oz cloth and do the same for this 12' one.
Any experiences out there to share? Thanks.
|Jan 24, 2003, 11:02 PM|
You need to use 1/8" vertical grain balsa for the spar, and cap it on both sides with carbon tow. You're not 'covering' the foam, you're building a glass wing and using the foam to give it shape. It needs to be vacuum formed. You don't need to use heavy glass.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||is the fling HLG wing strong enough to DL?||jstevens||Hand Launch||6||Oct 29, 2006 10:22 AM|
|Discussion||Making a lighter (yet strong) FFF wing||Nethole||Foamies (Scratchbuilt)||4||Aug 14, 2006 12:40 AM|
|Hot glue strong enough for wing joint ??||.-=banzai=-.||Flying Wings||13||Sep 14, 2005 07:19 PM|
|Making the Big MONGO electric??????????||Rob R||Foamies (Kits)||9||Jan 11, 2002 08:57 AM|
|Making Foam Wing||dorysch1||Electric Ducted Fan Jet Talk||2||May 09, 2001 11:16 AM|