|Oct 09, 2012, 10:24 AM|
Joined Apr 2012
I need help choosing a BEC
I'm new to this level of RC work and I need help choosing a BEC. I purchased this plane: http://www.bananahobby.com/green-cam...5420-prd1.html
and it appears the BEC is broken. Would this BEC: http://www.horizonhobby.com/products...tor-AGNK10382A
be an adequate replacement?
I'm also open to ANY suggestions. Id like to set this up so that when the escs or flight batt goes out I can still deadstick the plane down. Also, what would be an adequate power supply for the BEC to power the receiver and servoes?
Thanks a ton for any help and/or suggestions!
|Oct 09, 2012, 12:28 PM|
I'm new to this level of RC work
Does this mean you have several years of flying experience and this is your first jet? It is NOT a suitable first plane!
If the internal BEC has died, it would be better to get a brand new ESC (preferably with a built-in switching BEC). You could get an external BEC and power it from an additional pack, but are you sure the rest of your ESC is okay.
The chances of a flight battery dying or an ESC failing are pretty slim....if your flight pack does get low and you hit LVC you'll still have control over the servos.
|Oct 09, 2012, 12:44 PM|
like Kiwi asked...is this your first real RC plane experience?
If it is, and you decide to fly the jet as your first aileron RC plane, please take video of the maiden and post it.
If you have alot of aileron plane experience but with RTF models, then that ALign bec will work, but its a big big for your application. Its more for heli's than planes.
you can get the Castle CC Bec, or the very well thought of Hobbywing 5amp bec
|Oct 09, 2012, 09:09 PM|
Joined Apr 2012
Not several years. I've been flying planes for about a year now? This will be my fourth plane. I'm currently flying the UMX Corsair, UMX Beast 3d and UMX Mig15.
There are a few first though:
first multi-engine plane,
first plane with retracts,
first plane that I had to do any sort of assembly on,
first large plane?
And the BEC wasn't built into the ESC. The plane came wired with 2 ESC's leading to one BEC.
Thanks alot for the suggestions guys. This would be totally impossible without all the help.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Can we move on from choo choo trains now?||plowboy1966||Life, The Universe, and Politics||26||Mar 31, 2011 09:34 PM|
|Discussion||Completed Project Choo...Choo...||freddy warbird||Life, The Universe, and Politics||9||Mar 27, 2011 05:00 PM|
|Question||Help with UBEC, BEC needed. How much power do I need? Found out what it was.||Fox-composites||Power Systems||23||Jan 25, 2011 08:33 AM|
|Mental anguish due to ESC-BEC system : help needed||ciaranr||Power Systems||15||Dec 23, 2008 02:19 PM|