HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Nov 21, 2014, 04:26 PM
Registered User
reacher10's Avatar
United States, NY, Shirley
Joined Oct 2008
1,993 Posts
Discussion
Phillips PD 9012/37 slave screen ...blank screen

I just recieved a Phillips PD 9012/37 slave screen on eBay:

http://www.ebay.com/itm/321576408854...%3AMEBIDX%3AIT

The claim to fame with this LCD is it does not blue screen.

When I plug in a 3s lipo I can see the back light go on and it responds to the brightness control but I don't get anything on the screen which I'm assuming should be static.

Does a video plug need to be inserted into the av jack even if there is no video being input in order to see static?

Also there are two ground pins at the 12v jack. I tested them and they are for sure both connected so either one should work...I tried both individually but not both together. I can't see this as being an issue.

I don't have the proper plug for the av in and before I go to RS and get one I need to know if it needs one to be plugged in.

The seller states that it is in perfect working condition...all I did was solder a JST connector to power it.

Any input on thise would be great.
reacher10 is online now Find More Posts by reacher10
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 21, 2014, 06:54 PM
Registered User
United States, IA, Cedar Rapids
Joined Mar 2013
26 Posts
Just tried mine, just shows black when the video cable is not connected.
acegunn is online now Find More Posts by acegunn
Reply With Quote
Old Nov 21, 2014, 07:09 PM
Registered User
reacher10's Avatar
United States, NY, Shirley
Joined Oct 2008
1,993 Posts
Did you plug in the video cable and get static?

If so I hit RS in the morning and get the video cable...or better yet just solder a 3 pin connector if I can figure out what pin is what?
reacher10 is online now Find More Posts by reacher10
Reply With Quote
Old Nov 21, 2014, 08:11 PM
Registered User
United States, IA, Cedar Rapids
Joined Mar 2013
26 Posts
Yeah, plugged the cable back in and got static.
acegunn is online now Find More Posts by acegunn
Reply With Quote
Old Nov 21, 2014, 08:20 PM
Registered User
reacher10's Avatar
United States, NY, Shirley
Joined Oct 2008
1,993 Posts
OK..whew....I'll get the plug and try it out tomorrow and see what I can see.

I'll report how it goes.

Thank You for your help.
reacher10 is online now Find More Posts by reacher10
Reply With Quote
Old Nov 21, 2014, 08:30 PM
Registered User
United States, IA, Cedar Rapids
Joined Mar 2013
26 Posts
Just to be clear, I have a video receiver connected to the cable that is generating the static.

If I disconnect the cable from the receiver, but leave it connected to the slave screen, the screen goes to black.
acegunn is online now Find More Posts by acegunn
Reply With Quote
Old Nov 21, 2014, 08:48 PM
Registered User
reacher10's Avatar
United States, NY, Shirley
Joined Oct 2008
1,993 Posts
Ok, got ya. So it not just that the plug is inserted, the vrx must be powered up.

Yeah that's fine just as long as I know the deal before I buy more crap that I don't need....I got alotta crap!
reacher10 is online now Find More Posts by reacher10
Reply With Quote
Old Nov 22, 2014, 03:05 PM
Registered User
reacher10's Avatar
United States, NY, Shirley
Joined Oct 2008
1,993 Posts
It's up and running. It did need something coming in from Vrx. Great picture and goes static when video transmission is lost and staticy when it's interrupted.

This little monitor is a nice find!
reacher10 is online now Find More Posts by reacher10
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Blank screen on DEV F7, PLEASE HELP!!!!!! Mahadev Multirotor Talk 2 Oct 25, 2014 12:51 PM
Sold Kk2.1 blank screen CO2X2010 Aircraft - Electric - Multirotor (FS/W) 5 Sep 28, 2014 04:23 PM
For Sale FPV Monitor Phillips 9012 Rotorocious FPV Equipment (FS/W) 0 May 19, 2014 12:13 PM
Sold Philips 9" PD 9012/37 Slave LCD Monitor $50 shipped CONUS mjbennett9 FPV Equipment (FS/W) 6 Jun 05, 2013 08:43 AM
Sold Philips PD-7012 Slave screen Steph280 FPV Equipment (FS/W) 2 Apr 22, 2013 12:02 AM