HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Dec 01, 2013, 09:46 AM
Registered User
United States, NJ, Frenchtown
Joined Mar 2003
9,210 Posts
Yippee!
1 of 2 Guanli PBYs is finished.

Pulled everything out except the foam & pushrods to the tail surfaces.

Used some Hyperion 12 mm inrunners. 5980 KV with 11.17 to 1 gearboxes and APC E 8 X 8" props.
battery is a 3 cell 1800 mahr. 2 BP Hobbie 30 amp. ESCs
HS-55s R & E only.

Weight RTF 29 oz..............thrust is 14 oz static. & about 38 mph Computer duration is 32 minutes. Total amps are 7.0

These are all indoor testing results.Amps volts rpms .

I connected a 14 vdc car battery to the ESCs to simulate a 4 cell pack. Almost pulls out of my hand vertically. I do have to speed up a little slower to save the tiny plastic gear teeth in the large plastic gear.
Finished up all the ding & repainting repairs. I like the light weight & duration.
cyclops2 is online now Find More Posts by cyclops2
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DJI Phantom 1.2 vs 1.1.1 motosyndicate Multirotor Talk 24 Mar 26, 2014 12:05 AM
Discussion Guan Li PBY cyclops2 Waterplanes 0 Nov 20, 2013 01:21 PM
Discussion Finishing a Foam Plane with Fiberglass, Finishing Resin, Eze-kote, WBPU? torquenut Scale ARF/RTF 4 Nov 16, 2013 10:21 PM
Question Guanli Focke Wulf (Help needed) Krayola Power Systems 9 Oct 09, 2013 05:48 PM