Originally Posted by AeroKen

Real flight expansion pack 7 has a 51" AJ Slick. How close is that to how the real 51 slick flies?

Download Tominator's gas slick. It's a good plane to practice on. He also has a gas extra that is also very good.

deleted

Well guys....was coming in to land and decided to pull into a hover for a second.
Luckly I was just high enough that it didn't hit tail first, it did a 3 point. Wings are perfectly fine.....
Any suggestions for HOW to replace the firewall...I can easily make a new one. Just removing and replacing....

Originally Posted by alexjschauer

Well guys....was coming in to land and decided to pull into a hover for a second.
Luckly I was just high enough that it didn't hit tail first, it did a 3 point. Wings are perfectly fine.....
Any suggestions for HOW to replace the firewall...I can easily make a new one. Just removing and replacing....

I've had a firewall repair sort of like that before and here's what I did:

• Wicked some thins CA into the areas where it's spliced apart. Clamp it down really good and try to get it as well peiced back together as you can. It doesn't have to be perfect but just make sure that the glue is at least holding it down so that it doesn't pop back out.
• Then use some 5 or 30 minute epoxy and reinforced the whole firewall area (just be careful not to get any down in your motor mount holes.

Should be good as new.

+1 epoxy works good

Originally Posted by alexjschauer

Not very close at all.

Originally Posted by brathanke

It sux... don't waste your time.

Originally Posted by turnerm

Download Tominator's gas slick. It's a good plane to practice on. He also has a gas extra that is also very good.

OK, thanks guys. I've got Tominators gas slick and it is nice. I won't bother with the expansion pack slick then.

Originally Posted by turnerm

I've had a firewall repair sort of like that before and here's what I did:

• Wicked some thins CA into the areas where it's spliced apart. Clamp it down really good and try to get it as well peiced back together as you can. It doesn't have to be perfect but just make sure that the glue is at least holding it down so that it doesn't pop back out.
• Then use some 5 or 30 minute epoxy and reinforced the whole firewall area (just be careful not to get any down in your motor mount holes.

Should be good as new.

Originally Posted by 3Dplank

+1 epoxy works good

Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

anyone have a slick profile for Phoenix RC sim?

Try checking the epp extra thread

Originally Posted by lowkeylaidback

I need the starboard main wing for a 3dhobbyshop 48" EPP Extra 330, if you have one I am in the market, please send me a PM

Good God man... I've seen this same post in every thread I go into. Post a wanted ad in the classifieds.

Not trying to be an ass but posting the same thing in every single 3DHS thread is only going to annoy people.

it seems to be my only recourse in getting a wing, guys that follow this brand seem to have more then one of them as I do, so I am hoping that someone has a wing sitting around
it has been two weeks and no response from 3DHS, I would like to use this brand new plane

Originally Posted by turnerm

Good God man... I've seen this same post in every thread I go into. Post a wanted ad in the classifieds.

Not trying to be an ass but posting the same thing in every single 3DHS thread is only going to annoy people.

To late!!

they don't list a wing as a spare part. just like they stopped selling the fuse as a replacement part.

Buy another plane.

PM Horton.

Must not rant!!

Just take my cash and move on to another vendor, I guess that is my only option

ignore list is your friend