HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jan 11, 2013, 06:53 PM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
Build Log
profile MIRAGE 2000 D parkjet EPP 15mm

Hi...

I started build of my new profile MIRAGE 2000 D parkjet...It is my own design, wingspann 820mm, length 1155mm...I used 15mm EPP plates, it is very good material, flexible, light and strong...It is prototype, I want to know ho it will fly and I would like to make it like night flyer later...Here is few pictures...I will share more pictures and video from maiden flight...
pajlotmato is online now Find More Posts by pajlotmato
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 12, 2013, 05:47 PM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
Mirage is done, I just had to make choice which setup I will use for it...weight is 350g with servos without motor, esc and battery...I expect RTF weight between 550 - 650g...
pajlotmato is online now Find More Posts by pajlotmato
Last edited by pajlotmato; Jan 13, 2013 at 10:48 AM.
Reply With Quote
Old Jan 13, 2013, 03:31 PM
fortuna favet fortibus
Wobisch's Avatar
Schweiz, AG, Merenschwand
Joined Oct 2011
897 Posts
This one is very cool. Good luck with the maiden..
Wobisch is offline Find More Posts by Wobisch
RCG Plus Member
Old Jan 13, 2013, 07:35 PM
Fidler & twidler
empeabee's Avatar
Cranfield U.K.
Joined Mar 2004
4,087 Posts
looks interesting
Mike
empeabee is online now Find More Posts by empeabee
Reply With Quote
Old Jan 14, 2013, 12:53 AM
Crash-safe
lessram's Avatar
Baar, Switzerland
Joined Oct 2006
303 Posts
Very slick build.
Is the impression wrong, or did you use 2x 6mm depron for vertical stabilizer ?

olli
lessram is offline Find More Posts by lessram
RCG Plus Member
Latest blog entry: F/A-18 Mk II
Reply With Quote
Old Jan 14, 2013, 01:36 AM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
No, it is just one 7mm depron...I bought this engine for my Mirage : http://www.rctimer.com/index.php?gOo...9&productname=

Quote:
Originally Posted by lessram View Post
Very slick build.
Is the impression wrong, or did you use 2x 6mm depron for vertical stabilizer ?

olli
pajlotmato is online now Find More Posts by pajlotmato
Reply With Quote
Old Jan 15, 2013, 08:08 PM
Registered User
Waltjg's Avatar
Crystal River Fl.
Joined Jul 2008
3,681 Posts
Nice project Paj! W
Waltjg is offline Find More Posts by Waltjg
Reply With Quote
Old Jan 16, 2013, 02:18 AM
Registered User
Denmark
Joined Apr 2002
10 Posts
Subscribed... I hope U will give us some plans. I for one would like to build one ;-)
Ronin is offline Find More Posts by Ronin
Reply With Quote
Old Jan 16, 2013, 04:28 AM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
Thanks Walt, I am gonna make him like night flyer

Quote:
Originally Posted by Waltjg View Post
Nice project Paj! W
pajlotmato is online now Find More Posts by pajlotmato
Reply With Quote
Old Jan 16, 2013, 04:30 AM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
Yes, sure, I will share plan after maiden flight, I am not sure about CG so I have to check it during first few flights...

Quote:
Originally Posted by Ronin View Post
Subscribed... I hope U will give us some plans. I for one would like to build one ;-)
pajlotmato is online now Find More Posts by pajlotmato
Reply With Quote
Old Jan 17, 2013, 10:08 PM
222 km/hr Parkjet flyer
solentlife's Avatar
Latvia, Ventspils pilsēta, Ventspils
Joined Jan 2010
9,059 Posts
Just to wet appetites ... there's another guys Mirage 2000 plans ...

Snice Mrage 2000 ....

Not my place to steal his fame ... but a search I'm sure will pull it up either on here or Wattflyer ....

Just while we wait for p[lans for this threads beauty !

Nigel
solentlife is online now Find More Posts by solentlife
Reply With Quote
Old Jan 27, 2013, 03:57 PM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
Maiden flight

I maidened my Mirage today. It is excelent flyer. I should say it is high alpha flyer, like all deltas. My setup is motor DUALSKY XM2834CA-9 (980kv) with GWS 9x7,5 HD prop, ESC TURNIGY Plush 30A, Zippy Compact 3S 2200 mAh 25-30C battery and 3 x TURNIGY TGY-50090MG servos for elevons and rudder. I work on LED system for night flying now. Here are pictures and video from maiden flight...

EPP Mirage 2000 profile jet (4 min 16 sec)
pajlotmato is online now Find More Posts by pajlotmato
Reply With Quote
Old Jan 27, 2013, 04:48 PM
Fidler & twidler
empeabee's Avatar
Cranfield U.K.
Joined Mar 2004
4,087 Posts
Quote:
Originally Posted by pajlotmato View Post
I maidened my Mirage today. It is excelent flyer. I should say it is high alpha flyer, like all deltas. My setup is motor DUALSKY XM2834CA-9 (980kv) with GWS 9x7,5 HD prop, ESC TURNIGY Plush 30A, Zippy Compact 3S 2200 mAh 25-30C battery and 3 x TURNIGY TGY-50090MG servos for elevons and rudder. I work on LED system for night flying now. Here are pictures and video from maiden flight...
Gad what a brave man, maidening a plane that is exactly the same colour as the sky and the ground
She looked nose heavy, but I wasn't on the sticks
Mike
empeabee is online now Find More Posts by empeabee
Reply With Quote
Old Feb 23, 2013, 12:22 PM
Registered User
Slovakia, Veľký Krtíš
Joined Dec 2006
700 Posts
So, my Mirage nightflyer is completely done. I replaced old motor for new TURNIGY 3530-1100kv with APC 10x5 E prop which has more static thrust. RTF weight is 950g now. I can´t wait to first night maiden flight, we have very bad weather here
pajlotmato is online now Find More Posts by pajlotmato
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion MINI profile pusher jets: Mirage 2000, Mirage F1, F-18C ~ 14 in WS Fisticuffs! Pusher Prop Jet Models 4 Jan 13, 2010 07:51 AM
Build Log Mirage 2000, Mirage F1, F-18C Profile Pusher Jets -14 in WS Fisticuffs! Scratchbuilt Indoor and Micro Models 3 Dec 12, 2009 01:24 PM
Build Log Mirage 2000 Profile Jet with Plans Fisticuffs! Pusher Prop Jet Models 18 May 08, 2009 12:15 PM
Discussion EDF contest - 40mm profile Mirage 2000 kelberts Scratchbuilt Indoor and Micro Models 1 Mar 28, 2009 09:02 PM