|Jun 16, 2012, 08:39 PM|
Just bought these motors:
And have these Esc's:
And plan to use this battery:
Are my ESC's adequate or do I need to go bigger?
|Jun 16, 2012, 09:03 PM|
You should have no problem. I run the Avroto motors with 30 amp Maytech ESCs on 3S and the ESCs barely get warm. You picked a good motor too...I've used these on 3 quads and they perform great.
|Jun 16, 2012, 09:22 PM|
Very good to hear. Now if I only knew how to mount the motors, nothing lines up. Running this frame:
Overkill, perhaps? Anyone think so?
|Jun 16, 2012, 09:34 PM|
Try mounting the motor directly to the mount on the frame. Don't use the mount included with the Avroto. You should be able to get at least 2 screws to hold the motor, which is fine. Blue Loctite them, too.
|Jun 16, 2012, 10:55 PM|
Joined Jan 2004
A bit unconventional thinking but heres the way I see it.
589gram battery is good for aprox 1500W for 5 minutes using my rule of thumb that 10grams battery nets 25W power for 5 minute.
1500W / 4 is 375W per motor.
375W / 14.6VDC under load is 25.6 AMPS
Everything looks Kosher to me............
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Help!||Power HD DSP-33 sub micro servo question?||sgomes||Micro Ready-to-Fly||0||Mar 10, 2012 11:15 AM|
|Help!||Question regarding the repair of a Power 25||haines74||Power Systems||9||Mar 03, 2012 08:51 AM|
|Discussion||Anderson Power Pole Metal Locking Pins Question?||itsme2||Batteries and Chargers||7||Mar 01, 2012 09:31 PM|
|Discussion||Building GP Reactor 3D, Power question.||billmjam||Electric Plane Talk||0||Feb 26, 2012 07:59 AM|