Originally Posted by cmulder

yea second the vid ect request

Still waiting for servos and Tuning drive kit ...

Jürgen

Please make some photos of tuning set before and while attaching. Wish to kno i plastic kit for tuning set will be enough for me to add my motor and esc.
Not problem to make a shaft.

Thanks

Have you seen somewhere that they sell plastic alone ?
The local MPX rep was clear, only complete set, 120EUR.

Originally Posted by RENATOA

Have you seen somewhere that they sell plastic alone ?
The local MPX rep was clear, only complete set, 120EUR.

In the manuel for the xeno, on the last pages, there a all replacement-parts listed:

22 4111
Small parts, plastic parts for the power sets

Looks complete to me-

-bernhard

Originally Posted by barny

In the manuel for the xeno, on the last pages, there a all replacement-parts listed:

22 4111
Small parts, plastic parts for the power sets

Looks complete to me-

-bernhard

Hello Bernhard,

the last picture on page 31 in the manual might be a bit misleading.

Have a look at the content of the tuning drive set for example:

http://www.kd-modelltechnik.de/shop/...--Tuning-.html

1 Brushless-Motor Himax C 2816-1220 # 33 3017
1 Regler MULTIcont BL-30 S-BEC # 7 2289
2 Klappluftschraubenblätter 9" x 6" # 73 3492
1 Spinner Ø 35 mm, Blatthalter und Mitnehmer # 73 3504
1 Kabinenhaube zur Nutzung des Antriebssatzes # 22 4109
1 Verkleidung für den Antriebssatz # 22 4108
1 Klein- und Kunststoffteilesatz für Antriebssatz # 22 4111
1 Fernwelle mit Spannzange (für Wellen-Ø 3 und 4 mm) # 73 3505

If stock number 22 4111 would already include prop blades, spinner, canopy, drive cowling, extension shaft etc. there would be no need to list those items individually. Also the listed price for 22 4111 would be much too low at €19.90.

Jürgen

even on MPX site there is "Small+injected items power Xeno # 224111 * Price: 19.90 €" under REPLACEMENT PARTS for XENO

So?

Originally Posted by alex.guzun

even on MPX site there is "Small+injected items power Xeno # 224111 * Price: 19.90 €" under REPLACEMENT PARTS for XENO

So?

Do you really think, that for less money than the canopy (# 22 4109 = €9.90) and the drive cowling (#22 4108 = €12.90), you can get both items plus folding prop, spinner, prop adapter, motor mount, carbon drive shaft, ball bearing, shaft adapter etc. ? Dream on.

Jürgen

i'm just checking what MPX has on site as accessories, and what your hobbyshop has in shop for 16.90

If not, what is that part number, then?

Originally Posted by alex.guzun

i'm just checking what MPX has on site as accessories, and what your hobbyshop has in shop for 16.90

If not, what is that part number, then?

# 22 4111 is "Small parts, plastic parts for the power sets".

The plastic parts are the motor mount and the rear bulkhead, the small parts are the motor screws and probably the ball bearing.

Jürgen

we'll wait and see what it really is, ok?

Hi Guys,
How about getting one airborn, I would like to here about how well it does and if it will
thermal good.
Joe

Originally Posted by alex.guzun

we'll wait and see what it really is, ok?

No need to wait. I'll just write an eMail to Multiplex or give them a call.

Jürgen

Originally Posted by Joe Pierson

Hi Guys,
How about getting one airborn, I would like to here about how well it does and if it will
thermal good.
Joe

Considering the increased weight of the Xeno, I think it is rather a slope soarer than a thermal soarer, but we will see.

Jürgen

Chapter 4. Completing the wings

In order to glue the fin supports 28 and 29 into the recesses on the bottom of the wing (Fig. 6), you need to release the elevons at the inner end first (Fig.12).

Jürgen

Originally Posted by Jurgen Heilig

No need to wait. I'll just write an eMail to Multiplex or give them a call.

Jürgen

Cool, i'll be waiting tomorrow.
Alex.