SMALL - Telemetry SMALL - Radio
Thread Tools
Old Feb 20, 2015, 12:59 PM
RyanFromYEG is online now
Find More Posts by RyanFromYEG
Registered User
Canada, AB, Edmonton
Joined May 2014
1,675 Posts
Discussion
Central Alberta FPV

Hi,

Let's see where this thread goes. The primary purpose of this thread is to discuss all things flying as well as bring together members from all over Alberta.

Background for this thread


There are plenty of flying clubs in Alberta, but I haven't found one dedicated to FPV and the fun that it brings flying close quarters through trees, or chasing each others with wings.

This tread hopefully will bring together individuals with a common interest in FPV whether it be fixed wings or multirotor.

Here are some other Canadian Threads;
http://www.rcgroups.com/forums/showthread.php?t=1780063
http://www.rcgroups.com/forums/showthread.php?t=2122079
http://www.rccanada.ca/rccforum/showthread.php?t=103139 Alberta slope sites

Here are some Canadian Retailers;
http://buyrc.ca/
http://rotorgeeks.com/
http://www.flitelab.com/
http://www.canadadrones.com/
http://www.greathobbies.com/
http://www.pro-rc.ca/
http://www.liftrc.com/
http://autobotix.ca/
http://www.altituderc.com/
http://www.dtfuhf.com/shop/
http://www.snhobbies.com/index.php?o...22e9e6e31ca3de
Http://www.myfpvstore.com
http://www.armattanminis.ca/
http://patsminihquad.com/

Retailers Outside Canada;
http://www.getfpv.com/
http://www.readymaderc.com/store/
http://www.sdshobby.com/
http://www.foxtechfpv.com/
http://hobbyking.com/hobbyking/store/index.asp
http://www.banggood.com/
http://www.tmart.com/
http://goodluckbuy.com/
http://www.surveilzone.com/
http://www.getfpv.com/
http://www.rctimer.com/
http://multirotormania.com/
http://fpvhobby.com/
http://www.readytoflyquads.com/
http://www.himodel.com/
http://helipal.com/
https://www.sparkfun.com/

SO LETS GET TALKING FPV AND ANYTHING ELSE THAT FLIES
RyanFromYEG is online now Find More Posts by RyanFromYEG
Last edited by RyanFromYEG; May 28, 2015 at 03:13 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Feb 20, 2015, 03:43 PM
Beerwiser is offline
Find More Posts by Beerwiser
Registered User
Beerwiser's Avatar
Canada, AB, Mundare
Joined Mar 2011
894 Posts
Subbed, need to kick the crap out of the Calgary guys thread
Beerwiser is offline Find More Posts by Beerwiser
Reply With Quote
Old Feb 20, 2015, 03:48 PM
RyanFromYEG is online now
Find More Posts by RyanFromYEG
Registered User
Canada, AB, Edmonton
Joined May 2014
1,675 Posts
Thanks bud for helping with getting this thread moving. Spread the word with the others.

Don't let "The Canadian Thread" get wind of this .

We need an Alberta FPV meet. I know there are people, but no one realyl gets together.

I might go to Shad's meet in Winterpeg this summer for a road trip. Would prefer to head towards the mountains.
RyanFromYEG is online now Find More Posts by RyanFromYEG
Reply With Quote
Old Feb 20, 2015, 04:03 PM
B.Welwood is online now
Find More Posts by B.Welwood
Always in the Glue
B.Welwood's Avatar
Edmonton, Alberta
Joined Oct 2003
211 Posts
Great idea for a local thread. I think there's enough interest to make things worthwhile.
I'm just getting started into this stuff and have been having great fun with putting some frames together. My flying skills are not very good at this point.
I'd sure be interested in checking out FVP as I have zero experience here but have some ambitions about trying it.
Here's a couple of my MR's...
B.Welwood is online now Find More Posts by B.Welwood
Reply With Quote
Old Feb 20, 2015, 05:17 PM
RyanFromYEG is online now
Find More Posts by RyanFromYEG
Registered User
Canada, AB, Edmonton
Joined May 2014
1,675 Posts
Bob it looks like you have 6 MRs on the go and you are just getting into this stuff? Talk about diving head first.

You seem to have the hardware for FPV, so is it a matter of taking these out and having a spotter?

So a few questions...

What is th FC you are using?

Have you flown with snow on the ground? If so what have you used to keep waer out from the electronics?

If you are using a Naze have you tried Cleanflight?

Lastly, have the Zippys been good to you?

http://www.rcgroups.com/forums/showthread.php?t=2293247 You might be interested in this PDB for your ZMR250, there is also one for the ZMR250 clone.
RyanFromYEG is online now Find More Posts by RyanFromYEG
Reply With Quote
Old Feb 20, 2015, 05:43 PM
B.Welwood is online now
Find More Posts by B.Welwood
Always in the Glue
B.Welwood's Avatar
Edmonton, Alberta
Joined Oct 2003
211 Posts
Quote:
Originally Posted by RyanFromYEG View Post
Bob it looks like you have 6 MRs on the go and you are just getting into this stuff? Talk about diving head first.

You seem to have the hardware for FPV, so is it a matter of taking these out and having a spotter?

So a few questions...

What is th FC you are using?

Have you flown with snow on the ground? If so what have you used to keep waer out from the electronics?

If you are using a Naze have you tried Cleanflight?

Lastly, have the Zippys been good to you?

http://www.rcgroups.com/forums/showthread.php?t=2293247 You might be interested in this PDB for your ZMR250, there is also one for the ZMR250 clone.
Not a good enough flier to do FPV yet, just put some into the frame build.
I have both CC3D and Naze32, haven't tried Cleanflight yet.
Haven't flown in snow, too cold... that's why I do indoor practice.
Zippy' are ok so far but I'm not pushing things very hard.
Also have a flying wing for future FPV...
B.Welwood is online now Find More Posts by B.Welwood
Reply With Quote
Old Feb 20, 2015, 05:47 PM
RyanFromYEG is online now
Find More Posts by RyanFromYEG
Registered User
Canada, AB, Edmonton
Joined May 2014
1,675 Posts
Who's wing is that? It looks like it is ready for some night flying.

That's the point of this thread. Its to get guys to go out together and do some flying.
RyanFromYEG is online now Find More Posts by RyanFromYEG
Reply With Quote
Old Feb 20, 2015, 06:06 PM
B.Welwood is online now
Find More Posts by B.Welwood
Always in the Glue
B.Welwood's Avatar
Edmonton, Alberta
Joined Oct 2003
211 Posts
It is a slope wing - Bee2. I built it with LEDs, it has KK2 board for stability control, and also has a removable power pod with FPV VTX and camera.
Flew it at the slope last fall, flies and looks great. Here's a closer look at the lights...
BeeNERS (1 min 9 sec)
B.Welwood is online now Find More Posts by B.Welwood
Reply With Quote
Old Feb 20, 2015, 06:44 PM
Beerwiser is offline
Find More Posts by Beerwiser
Registered User
Beerwiser's Avatar
Canada, AB, Mundare
Joined Mar 2011
894 Posts
Holy UFO lol. That is pretty cool hooking up to stick inputs, never seen that before.
Beerwiser is offline Find More Posts by Beerwiser
Reply With Quote
Old Feb 20, 2015, 06:58 PM
B.Welwood is online now
Find More Posts by B.Welwood
Always in the Glue
B.Welwood's Avatar
Edmonton, Alberta
Joined Oct 2003
211 Posts
UFO, the guys at the ridge thought so too. I got 30 minutes of video flying it but when I got home, I discovered that I had left the lens cover on the GoPro. D'oh...
B.Welwood is online now Find More Posts by B.Welwood
Last edited by B.Welwood; Feb 20, 2015 at 06:58 PM. Reason: Spelling
Reply With Quote
Old Feb 20, 2015, 08:48 PM
RyanFromYEG is online now
Find More Posts by RyanFromYEG
Registered User
Canada, AB, Edmonton
Joined May 2014
1,675 Posts
Care to share the location for slope soaring
RyanFromYEG is online now Find More Posts by RyanFromYEG
Reply With Quote
Old Feb 20, 2015, 10:14 PM
Punisher_67 is offline
Find More Posts by Punisher_67
Another Dumb Canadian
Punisher_67's Avatar
Joined Feb 2012
295 Posts
Hello from Wetaskiwin

I have quanum venture and just got into flying quads this year myself..... I am also Ryans father inlaw
Punisher_67 is offline Find More Posts by Punisher_67
Reply With Quote
Old Feb 20, 2015, 10:40 PM
Forced_Inducti is offline
Find More Posts by Forced_Inducti
Registered User
Joined Dec 2008
240 Posts
Hello from camrose

Ive been into RC fixed wing for 12 years, helis for 8, and just set up my first MR this winter. I had a rocky start with FPV last summer losing 2 airframes to it and a repairable crash on a 3rd before i put it down for a bit. But now I have a couple dozen flights on my SK450 dead cat with the goggles on and Im loving every one of them. Id definately be up for a meet, and will be making a few fun flys this year between the camrose modellers and the trout farm flyers clubs. None of which have much for FPV so it would be nice to see others setups!
Forced_Inducti is offline Find More Posts by Forced_Inducti
Reply With Quote
Old Feb 20, 2015, 10:45 PM
Beerwiser is offline
Find More Posts by Beerwiser
Registered User
Beerwiser's Avatar
Canada, AB, Mundare
Joined Mar 2011
894 Posts
Didn't now anyone at the trout farm flew fpv, thought it was a giant gasser club as of late.
Beerwiser is offline Find More Posts by Beerwiser
Reply With Quote
Old Feb 20, 2015, 10:52 PM
RyanFromYEG is online now
Find More Posts by RyanFromYEG
Registered User
Canada, AB, Edmonton
Joined May 2014
1,675 Posts
@Forced

You are ahead of me. I had one flight on my MR, but it needed more PID tuning. Fly the 250 class MRs and you can crash the crap out of them. All you need to do is fix the props.

Another option is a wing like the Popwing, they are fairly crash resistant.

Put a call out for a meet on here. I am trying to track down others.

BTW, did you get a SPAM email or MSG from me? I don't consider it SPAM, but some might. I just want people to talk and participate in such a great hobby.
RyanFromYEG is online now Find More Posts by RyanFromYEG
Reply With Quote


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Anyone Racing FPV Central/South Texas? ozzie111 FPV Racing 76 Yesterday 08:47 AM
Fly-In Central Florida FPV Meet - February 2015 CFL FPV Electric Flight Events 120 Aug 04, 2015 08:13 AM
Discussion 2nd Annual Central Alabama FPV Meet kev9974 Electric Flight Events 31 Apr 17, 2015 07:11 PM
Discussion Calgary Alberta fpv guys? camaroguy FPV Talk 8 Feb 25, 2014 02:40 PM
Discussion FPV in Southern Alberta aaron_gx FPV Talk 0 Jun 17, 2010 10:46 AM