Turnigy 9x + joystick Logitech = ... :)
So, what we have it here? This is a DIY transmitter build based on spare parts from the Turnigy 9X (main PCB, LCD, rc module) + rebuilded joy from the 3-axis Logitech joystick (mainly all switches was remowed and new ones installed, in addition hallotron was added to the fire button which is throttle now) - so in one joy you have all four basics channels (throttle, rudder, elevator and aileron). Plus a lot of switches.
RC module is now outside a box in alu tube with RP-SMA antenna mount. It is possible to change the antenna to any model you want to have, or use the cable to move the antenna on the top of the pole and extend the RC range.
To use any source of the power there is XT60 connector inside a box. There is a lot of free place here so it is possible to use it as a normal tool box and keep spare proppelers or CA glue for example.
To make an anytime software upgrade I've installed 10pin KANDA inside.
Video of the action.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Turnigy 9X w/OPEN9X, Backlight & Aluminum Joysticks||pvtkarma||Aircraft - General - Radio Equipment (FS/W)||2||Feb 14, 2014 01:15 AM|
|Discussion||FlySky/iMax/Turnigy 9x/Eurgle USB Host mod (Fly with a joystick, and no PC!)||BushmanLA||Radios||1||Dec 29, 2013 10:57 PM|
|Mini-HowTo||Turnigy 9X 3rd joystick for FPV Pan/Tilt||crd||FPV Talk||21||Sep 11, 2013 05:22 AM|
|Mini-HowTo||Turnigy 9x with a PS2 joystick.||pprioverde||Radios||0||Oct 20, 2012 12:07 AM|
|Mini-HowTo||Turnigy 9X 3rd joystick for FPV Pan/Tilt||crd||Radios||0||Oct 19, 2012 03:55 PM|