HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Oct 07, 2012, 06:03 PM
Registered User
Joined Sep 2012
103 Posts
Discussion
4mm. shaft > to 3/16 or 5 mm thread??

Hey

In case i have to buy a 4 mm powertrim(according to fit the hull), ill need to have a bearing 4mm. > to 3/16 (4,76) to fit the 3/16 props.

Anyone know if its possible??
cosey321 is offline Find More Posts by cosey321
Reply With Quote
Sign up now
to remove ads between posts
Old Oct 07, 2012, 10:02 PM
Registered User
Joined Jul 2008
1,817 Posts
Totally possible and look here if you are in the US http://www.mackproductsrc.com/props_&_hardware.htm
Good folks and a good product use the double if there is any misalignment.
Kcal is offline Find More Posts by Kcal
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Drive dog brass 3/16 on 5 mm thread? cosey321 Racing Boats - Electric 3 Sep 27, 2012 08:50 AM
Found 20mm X 40mm inrunner 2500-3000 kV w/ 2.3 mm shaft or Mega 16/7/7 or 16/7/6 FOUND 8ballfever Aircraft - Electric - Power Systems (FS/W) 1 Apr 22, 2011 10:48 AM
Found RFM 12.75 x 13 Prop and/or RFM 30 mm Spinner for 5 mm Shaft AEMontoya Aircraft - Electric - Power Systems (FS/W) 0 Jun 24, 2010 02:00 PM
Question RFM Spinner for 3.2 mm shaft on Hacker B20 Motor with only 3.0 mm shaft? AEMontoya High Performance 1 Dec 28, 2009 03:57 PM
Sold Mega ACn 16/25/3 (Combat - thick 5 mm shaft) - New!! Randy -- Aircraft - Electric - Power Systems (FS/W) 5 Sep 06, 2008 02:00 PM