Thread Tools
Old Jul 18, 2013, 03:14 AM
Airrover is offline
Find More Posts by Airrover
Registered User
Joined Aug 2009
100 Posts
New Product
Tarot GOPRO 2-axis brushless gimbal control gyro

● Auxiliary output video supports GOPRO Hero3
● Support the supply voltage polarity protection and voltage compensation
● Support the motor drive end short-circuit protection
● Support for custom initial pitch angle
● Sensitivity parameter adjustment support and software 3D pose show
● Supports joystick rate mode and position mode
● Support Receiver: conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver
● Support remote control device: PPM/PCM/2.4G
● Working Voltage: DC 7.4V ~ 14.8V (Recommended 12V, 3S LiPo battery)
● Working current: 200mA-500mA (power supply voltage and the motor related)
● Working temperature: -15 ℃ ~ 65 ℃
● Processor: Dual 32-bit high-speed ARM core processor
● Sensor: Three rotor MEMS gyroscope rotor MEMS accelerometers and the three
● Maximum angular rate: 2000/sec
● Maximum acceleration: 16g
● Control frequency: 2000Hz
● Motor drive frequency: 20KHz (no noise smoothing drive)
● Control accuracy: 0.1
● Control angle range: -45 ~ 45 (roll), -135 ~ 90 (tilt)
● Attitude solver algorithms: PTZ dedicated brushless motor decoupled EKF algorithm
● Applicable shooting equipment: GOPRO Hero3
Airrover is offline Find More Posts by Airrover
Reply With Quote
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Using 2 x 2 axis brushless boards to control a 3 axis gimbal squamish_chief Multirotor Talk 3 Aug 30, 2013 10:24 PM
Sold RCTIMER 2-Axis Brushless Gimbal For GoPro with Controller & IMU v1.0 ptweet FPV Equipment (FS/W) 2 Jul 08, 2013 10:26 PM
Discussion Tarot GOPRO 2-axis burshless gimbal Airrover Product Announcements 0 Jul 06, 2013 09:41 PM
For Sale GoPro 2 axis brushless gimbal/controller Rcchristo Aircraft - Electric - Multirotor (FS/W) 7 Apr 29, 2013 12:23 PM