Who carries the GWS props? Of all the searching I`ve done on this thread,,, Ive
never seen a link? & then by the time I ask about it, I forget which one I need, which
is why in My 1`st ever post, I asked for a part number. How hard can it be? Some-one is buying
these things from "somewhere". Who carries the things? I just want to buy a couple
5030`s from GWS. There is almost 200 posts on this thread. I tried, but I can`t read
alluvem. Just need a part number & dealer for the prop

Originally Posted by Skyepuncher

Who carries the GWS props? Of all the searching I`ve done on this thread,,, Ive
never seen a link? & then by the time I ask about it, I forget which one I need, which
is why in My 1`st ever post, I asked for a part number. How hard can it be? Some-one is buying
these things from "somewhere". Who carries the things? I just want to buy a couple
5030`s from GWS. There is almost 200 posts on this thread. I tried, but I can`t read
alluvem. Just need a part number & dealer for the prop

http://www.rcgroups.com/forums/showthread.php?t=1540831
BabbelBatts, scroll dwn to bottom of page. OR
http://www.allerc.com/ep5043-propell...0mm-p-544.html

Originally Posted by SilentPilot

Yes!

The 2S batts have the Eflite UMX plugs and charge as normal, the 3S batts have the UMX plug and a balance tap.

If unsure which one just PM RC and ask, though I suspect JST XH will be fitted unless another was specified...

Excellant! Thanx for the response. I`m sure Babbs knows what I need via
the e-mail. Just didn`t come to Me till later, about the charging of the 3-S
batts.. It will either fry something, or I will be ordering more. Some of You
Guy have got Me wanting the SBach, too. Not too crazy about the GeeBee.
It`s cute, but that`s about as excited as I get. Speed is all Yer gonna get, `cept
maybe a KE. If I had one, I`d take the motor out of it, & park it.
Sometimes E-Flite just gets on Yer nerves. That thing, (to Me) is a mantle
piece, unless You happen to be a GeeBee freak. Then, I suppose it would
be cool.. GB is made for racing. Not too many of us who fly the UM`s are into
that. Least not as far as I can see.

Originally Posted by Skyepuncher

GB is made for racing. Not too many of us who fly the UM`s are into
that. Least not as far as I can see.

Just ask those of us who have run an Sbach on 3S and a 5043 prop with no landing gear. It must do somewhere around 50! It really is unbelievable. I'd say that's racing for a 2.5 oz piece of foam...

That`s wonderful! Awesome! Now could someone PLEASE give Me alink
to the Props? As Stated before,,,,,,,,,, I don`t know where to go to BUY them..
It`s all good erkq, Wish I could watch
As I said earlier,,,,,,,,, I read thru about a hundred pages of posts on this thread.
All I`m asking for is for someone to give Me a link for the props. Sheez.

Originally Posted by Skyepuncher

That`s wonderful! Awesome! Now could someone PLEASE give Me alink
to the Props? As Stated before,,,,,,,,,, I don`t know where to go to BUY them..
It`s all good erkq, Wish I could watch
As I said earlier,,,,,,,,, I read thru about a hundred pages of posts on this thread.
All I`m asking for is for someone to give Me a link for the props. Sheez.

I just get them from my LHS. But online there's:
http://www.hobbyking.com/hobbyking/s...6pcs_set_.html
http://www.microflight.com/Prop-EP-5043
http://www.headsuprc.com/servlet/the...ers-ONE/Detail
and a bunch of others.

Originally Posted by Skyepuncher

That`s wonderful! Awesome! Now could someone PLEASE give Me alink
to the Props? As Stated before,,,,,,,,,, I don`t know where to go to BUY them..
It`s all good erkq, Wish I could watch
As I said earlier,,,,,,,,, I read thru about a hundred pages of posts on this thread.
All I`m asking for is for someone to give Me a link for the props. Sheez.

Look three posts up, shastamike gave you two links. Also RCBabbel Sells the GWS 5030 and 5043 props. So you can order them directly from him with your batteries. Also get the 5030 unless you're switching the motors as well.

-Brian

Thanx. That post up ther w/ the links wasn`t there earlier. On another note....... I went
thru the check-out process earlier @ progressive r/c, for the charging adapters.
When I went to use Pay-pal, it said the site should NOT BE GIVEN SENSITIVE
INFORMATION . I of course backed out. Never had that before.???

GWS props-- $1.85 shipping on most orders, in Indiana, fast shipping. Hobbyking GWS props themsevles are cheaper but you can't specify
prop color and shipping is 2-3 weeks.

so my favorite is---the ones mentioned above have expensive shipping
http://www.gwsprops.com/


Progressive RC
odd what happened with paypal, could just call them, superb customer service.

Originally Posted by Skyepuncher

Thanx. That post up ther w/ the links wasn`t there earlier. On another note....... I went
thru the check-out process earlier @ progressive r/c, for the charging adapters.
When I went to use Pay-pal, it said the site should NOT BE GIVEN SENSITIVE
INFORMATION . I of course backed out. Never had that before.???

Skyepuncher,

Email sent.

Welcome to RCG!

I'm happy to announce that I have added 6-port (2S) JST-PH charge & balance cables to my inventory.
$8.95 ea.

Info and pic on my blog:
http://www.rcgroups.com/forums/showthread.php?t=1540831

Thanks,

rc

Originally Posted by RCBABBEL

Skyepuncher,

Email sent.

Welcome to RCG!

I'm happy to announce that I have added 6-port (2S) JST-PH charge & balance cables to my inventory.
$8.95 ea.

Info and pic on my blog:
http://www.rcgroups.com/forums/showthread.php?t=1540831

Thanks,

rc

Got it. Thanx Roger. How covenient is that? Reply Sent.,
Scott

Originally Posted by flyrtim

GWS props-- $1.85 shipping on most orders, in Indiana, fast shipping. Hobbyking GWS props themsevles are cheaper but you can't specify
prop color and shipping is 2-3 weeks.

so my favorite is---the ones mentioned above have expensive shipping
http://www.gwsprops.com/


Progressive RC
odd what happened with paypal, could just call them, superb customer service.

Thanx. Yeah,, that was odd w/PP. Kind freaked Me out alittle. Almost like
I was being hacked-into, or something. Anyway,,,,,
I just ordered everything I need from RCBABBLE.
2 2S batts, 2 3S batts, (180`s) , 2 GWS 5030`s, & the 6-lead charging
adapter. That was really handy. Now I`m stoked. Can`t wait to get the
lil Bipe back out, with some thrust. It`s really a dog w/ the batts I have
now. No fun at all, & everything is in as new condition, only about a year
old. I have a couple Twisted-Hobbies planes in the mean-time that will
have to do. ( & some old helis)

What is the best glue to repair my beast? I busted the wing off and one of the supports between the wings and it also pulled the plastic/carbon fiber thing loose.

Not sure if I should use Welders (never used it before), Thin foam safe CA, Thick foam safe CA, hot glue gun, or what?

Thick foam-safe CA and kicker, easiest and fastest to work with.

Originally Posted by jevs

What is the best glue to repair my beast? I busted the wing off and one of the supports between the wings and it also pulled the plastic/carbon fiber thing loose.

Not sure if I should use Welders (never used it before), Thin foam safe CA, Thick foam safe CA, hot glue gun, or what?

Canopy glue or UHU Por.