|Jan 19, 2003, 01:55 PM|
Salt Lake City
Joined Jan 2003
Wingo Wing Failure - Ouch!
On the third perfect flight of my Wingo this morning, disaster struck. I put the plane in a steep dive and then pulled up, planning to do a loop. Well, the stress split the wing right down the center. Needless to say, I came home with a box of parts. Nothing some glue and time won't fix, though.
My question: I've heard of folks reinforcing foam wings. I guess that must be a good idea! How is the reinforcing done? What material is used?
|Jan 19, 2003, 02:06 PM|
Another satisfied Wingo user
Sounds like one of your wing supports came loose.
You can tape the parts with "thin" packaging tape like they use for the JKAerotech planes like the T-52. This tape is quite a bit thinner (read lighter) than the stuff you buy at Walmart, etc. ZAGI tape will also work. Overlap each spanwise length of tape by about 1/2" starting the first strip at the trailing edge. Better yet, read the T-52 taping procedure.
Goto "Instructions and Tech Stuff", than to T-52 building Instructions.
The WINGO fuselage is generally what comes apart.
By the way, the T-52 is nearly indestructible.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Wing failure - pilot error or manufacturer fault?||Peter Young||Electric Plane Talk||23||May 03, 2003 07:24 AM|
|What other plane with Soarstar/Wingo wing?||Quacker||Foamies (Kits)||4||Dec 02, 2002 11:38 AM|
|Securing Wingo wing||Richard Emholtz||Parkflyers||3||Aug 05, 2002 09:58 PM|
|warped wingo wing||starman||Foamies (Kits)||2||May 24, 2002 02:53 PM|
|hs225bb failure... ouch!||jaggies||Electric Heli Talk||0||Dec 16, 2001 02:06 PM|