|Jun 07, 2006, 11:04 PM|
Finally started work
Today was just a push to get started... so far I have cut the shape of the outer section of the wing. And what's left is to sand/shape these pieces of foam and to sand shape the wooden tailpieces.
Here are some pics... if you see any way off errors let me know...
My plan is to bag at least two wings...
Oh and any suggestions on bagging the tail pieces. I know the grain of the vstab is probably the wrong way, but it was the only way I could get the all the pices out of that one piece of balsa.
ImagesView all Images in thread
|Jun 08, 2006, 09:28 AM|
Ft. Mill SC / Charlotte NC
Joined Mar 2001
Add a small piece of Kevlar around the bottom of the tail. Just the leading edge. This will prevent and damage when the ship lands. Once its bagged it will be very hard and resistent to dings on the leading edge. If your using kevlar on the whole tail disregaurd. If glassing use the glass on the 45. Again if you have some scrap kevlar around put a piece across the hinge line. After the tail cures you can use it as a hinge. Works good
|Jun 14, 2006, 03:55 AM|
Joined Sep 2003
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Yippee!||The raffle has finally started!!!||jludwick||Slope||0||Oct 07, 2005 07:53 PM|
|Alert||Started Work on 2 EDF Entries||rookbartley989||Electric Ducted Fan Jet Talk||45||Dec 07, 2004 10:55 PM|
|Finally started my winter project||P-51 fan||Parkflyers||35||Jan 20, 2004 11:00 AM|
|Finally Started to Build my Sportwin!||Robert Hoffman||Sport Planes||217||Jun 10, 2003 09:50 AM|
|F-18 finally started (pink and blue foam)||ryan d.||Electric Ducted Fan Jet Talk||9||Aug 08, 2002 08:26 PM|